|
Hello, I have a 2011 Nismo that a/c clutch won't engage when a/c selected. The light in the button turns on, and my scanner says the control is sending signal
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-25-2021, 04:01 PM
|
#1 (permalink) |
|
Base Member
Join Date: Oct 2020
Location: KY
Posts: 28
Drives: 2011 370Z Nismo
Rep Power: 6  |
A/C Clutch not engaging
Hello, I have a 2011 Nismo that a/c clutch won't engage when a/c selected. The light in the button turns on, and my scanner says the control is sending signal to the IPDM.
I can run 12v to the compressor and clutch will pull and a/c runs. I am thinking its either the pressure switch or a/c relay, which I think is buried in the IPDM? I have checked all the fuses and they are good. Any thoughts before I go to dealer for diagnosis? |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Strange noise when engaging clutch at high rpm | Gooch | Engine & Drivetrain | 1 | 12-28-2017 06:37 AM |
| A/C Compressor Not Engaging | ivan_star | Engine & Drivetrain | 2 | 04-23-2017 04:47 PM |
| Clutch pedal drops 2" before engaging all the sudden | hughdogz | Engine & Drivetrain | 7 | 07-02-2014 07:57 PM |
| Lower clutch engaging point after Zspeed CSC replace???? | Hatsuongmai | Engine & Drivetrain | 11 | 03-01-2013 01:28 PM |
| VDC engaging under acceleration? | gh0st3794 | Engine & Drivetrain | 16 | 02-22-2010 01:42 PM |
9Likes
Threaded Mode
