Quote:
Originally Posted by Elia Cid
280z/300zx,
Than at after everything is said and done what type of total gains should I expect from let’s say Stillen G3 and typical CBE without HFC like Stillen or FI , HKS?
Would I have the same total gains with the HKS suction relaod kit , and HKS CBE (no HFC) as i would with the Stillen G3 and HKS CBE (no HFC)?
Thanks,
Alex
|
Not really familiar with the HKS suction reload kit so couldn't say. In general a typical CBE and good quality intake like the G3 would get you 20-25hp at the wheels depending on the dyno. Mod's hp gains individually don't stack as you start combining. For example FI CBE is good for about 15hp. The G3 is go for about 15hp also. Combining the two doesn't equal 30hp gain. As you start adding mods they work together as a system. Again, HFC are worth 10+hp but when you couple it with a CBE they are only goo for about 6-7.
I have other reasons but thats one reason I'm just going to keep the stock air boxes and use k&n filters with cobb tubes. Cheaper and almost as effective.