View Single Post
Old 04-08-2010, 02:07 PM   #15 (permalink)
JB-370z
A True Z Fanatic
 
JB-370z's Avatar
 
Join Date: Apr 2009
Location: Houston, Tx
Posts: 1,859
Drives: Stage 2 Twin Turbos
Rep Power: 18
JB-370z is on a distinguished road
Default

Quote:
Originally Posted by ATL_Red_G35 View Post
OP, here's my question.

Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise.

Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem.

I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter.

I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35
Below is a picture of a Z with 370mm Endless rotors which is 14.56656367 inches the rotor I went with is 380mm which is 14.96025458 inches so yes there is no reason why they wont fit 20". I have the same identical specs as the Z in this picture. 1/4 of an inch difference is all I am worried about but it might be enough to not fit but I will be the lab rat on this one. Plus Mike said we could switch out for a 14" rotor as soon as the bracketts are made. Mikes got my back either way so we will find out soon if 1/4 inch is going to kill me or not.


__________________
ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll
GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

Last edited by JB-370z; 04-08-2010 at 02:10 PM.
JB-370z is offline   Reply With Quote