Nissan 370Z Forum - View Single Post

NissanTracker · 06-07-2020, 05:32 PM

Hi forum,

Almost completed the A-A kit on my 350z HR. I pulled out the GTR injectors and proceeded to Install the 1050x's. There is a spacer included. These are not going in as firm as the Denso GTR's. I screwed down the fuel rail, they look in there... But spacer has some (very very little) up and down play. Are these installed correctly?

I added them on the fuel rail first, then installed them as an entire assembly.

Thanks for the help

-NT

06-07-2020, 05:32 PM	#1 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29261	ID 1050X injector seating question Hi forum, Almost completed the A-A kit on my 350z HR. I pulled out the GTR injectors and proceeded to Install the 1050x's. There is a spacer included. These are not going in as firm as the Denso GTR's. I screwed down the fuel rail, they look in there... But spacer has some (very very little) up and down play. Are these installed correctly? I added them on the fuel rail first, then installed them as an entire assembly. Thanks for the help -NT