Quote:
Originally Posted by osbornsm
I am working on my car and need to know the torque spec for ________ bolt.
This post will server as a reference guide which will be updated over time.
Please let me know any additions you have to the info below.
- Unless otherwise specified, all number values below are in ft/lbs.
==================================================
Suspension- Sway Bar Brackets (Front) = 51
- Upper Control arm (Front) = 54
- Lower Control arm (Front) =
- Hub/Knuckle lower bolt (Front) = 136
- Hub/Knuckle upper bolt (Front) = 55
- Shock Top bolt (Front) = 60
- Swaybar ends (Front) = 84
- Strut Tower Bar = 52
==================================================
Drivetrain
==================================================
Interior
==================================================
Brake- Caliper bolts (Front) =
- Caliper bolts (Rear) =
- Bleeder screw =
==================================================
Additional Helpful Info
==================================================
Diagram icon definitions
|
Front Upper control Arm is 2 Bolts and washers tightened
40 FOOT POUNDS at the Chasis,
1 nut and bolt
41 FOOT pounds at the spindle.
I snapped a bolt looking at what i discovered was 350z torque specs
Now i have to drill it out and buy 1 new bolt and square nut
please review the numbers here and match them to the 370z FSM before working on your car
REFER to 370z FSM @ page FSU-14