Quote:
Originally Posted by jchammond
to use a rounded close number; From a 0* (straight up & down tire/wheel) ,the top of the tire will lean in roughly 10mm per negative degree of camber.
Sport wheel's are already pretty sunk in from the factory (19x9+47,19x10+30)
|
Remember though, I'm on Nismo wheels, not Sport wheels. The offset is a little more aggressive on these.
Quote:
Originally Posted by jchammond
Wherever you get it aligned; when you change camber-it changes toe & as Rusty stated "be sure & have toe a tad on the positive side" (slightly inward) as a 0 setting or -setting will make your pucker factor go up while doing some spirited driving!
|
Yes sir. Honestly, I've never run 0 toe ever on any vehicle for obvious reasons.