Quote:
Originally Posted by future370zzz
What tires are you on? It's not getting swirly at 500whp? I got hankook v12 evos and they get swirly with the small amount of power I have at full takeoff. Can't image at 500whp especially on the dig run with the evo.
|
Im on Mickey Thompson ET Streets. Those paired with Ecutek's adjustable traction control I can take off from a dig and not spin at all. From a dig I keep the TC on around 15% and Im good. If I turn it all the way to 0% I will roast the tires off for sure. From a roll I keep it on about 5% and usually never have any problems. That is from a 40 and up. Anything lower I might have to take the TC up a little. Just depends on the road.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34
|