So now that the Z has around 700 miles on her it's time to start replacing those worn out parts
As it sits:
Stage One: the bolt ons (Putting together orders right now)
BC Racing Coilovers
SPL Pro Front Upper Arms
SPL Titanium Rear Camber arms
Injen CAI
Motordyne ART Pipes
Fast Intentions TDX or AAM Comp S-Line or Motordyne complete setup (the FI 2-3 month lead time is uncool so considering the alternatives strongly)
Oil Cooler (undecided)
Uprev Dyno tune
New Re-11 275/40/18 out back
Move the 245's currently in back to the front
Spacers if necessary, will see after the suspension is done
Winter Projects
The FI exhaust would take so long it could almost go into this category if I go that route
Proper LSD setup
Second set Wheels and Tires for Track
Throw the OEM Clutch in the garbage and replace
Short shifter
Stiffer sway bars front and rear
Wetsand and polish away the factory orange peel
Matte orange wrap
Custom front grill with Hella Micro Xenon driving lights
Some sort of ducting or intake to feed more outside air to the CAI and/or get heat out from under the hood
A real rear diff
Lighted side turn signals from Touring
Heated leather seats and door panels
New head unit and speakers
Tinted JDM tail lights
Order second set of exterior door handles to paint black (keyless)
I'll update, revise, edit, what have you, as time goes on. Largely this is just as much a reference for me much as anything.
As always comments, critiques or suggestions appreciated