So, sorta digging this up from the past, we came up with an "inventive" solution to being able to put your stock seat back in if you change back. We only put our racing seat (Sparco Pro 2000) in for the one week of the year of One Lap of America. So I needed to be able to put the seat back in, and not have to order a new wiring harness for the plug only. So we came up with, what seems to be, a great solution.
I removed the plug from the seat and clipped it (two wires) about 2 inches up. On the wires remaining on the seat I put two female crimp on plugs. We wired the resistor with two inches of wire and on the loose ends put 2 female crimp on plugs. Then on the loose plug we put two crimp on MALE plugs. Now that plug can be switched between the resistor, or the seat, depending on its need!
Tracy Ramsey
|