Enjoy
Pad Removal:
There are 2 pins that go across the top of the caliper and hold the brake pads in place. Those pins are secured themselves with cotter pins.
Remove the cotter pins and with a small punch, drive the pins out of the calipers.
Once the pins are removed, pull the pads out of the top.
Use a couple of flat blade screwdrivers to push the pistons back into the calipers to make room for the new, thicker pads.
Transfer the shims from the old pads to new ones, and reinsert the pads in the calipers.
Replace the pins and cotter pins and you are done.
Last edited by Nut_N_Much; 01-25-2015 at 07:12 PM.
|