I'm not sure if anyone else uses this or not but, I have been using it for track day paint protection since Mar with pretty good results.
What is it? It is a latex based film you simply roll over you freshly waxed paint. They send a small roller and tub with the 1 qt bottle. My roller was broken in transit so I have been using a small 4" edge roller, the same you would use to paint your house. 1 qt costs about $50 bucks and you need roughly 1 cup to coat what I usually do. I put 2 coats on pretty thick and go from right behind the trailing edge of the headlights, across the hood and the front air damn and splitter.
I don't represent these guys or get anything from them just thought it worked pretty well for the cost and decided to share the info.
Below are some before and after photos of last weekends track event. It was a 2 day 8 session event and the track gets allot of rubber slag.
The first photo is from last Sat sitting at the track after arriving. You can see it mostly dries to a clear film.
And here is the aftermath of the track day just before spraying it down to clean.
Here is a video showing how easy this stuff comes off. Sorry for the angle of this was holding the phone and sprying but, you get the idea
The finial picture is after spraying it all off. I missed a few areas when I applied it near the splitter and the one at the driver headlight.
So all in all I give this stuff a 9/10 real easy to use and works for track debris pretty well. I don't have a clear bra so this was a good compromise for the time being. Even if I had a clear bra I think I would use this over it.
