Quote:
Originally Posted by jwick
In the front you will basically be the same on the outer face and almost 1/2" more (closer to engine bay) on the inner face. Rear is almost 1/2" further out on the outer face (away from car) and almost the almost the same as current on the inner face. Not sure how much room you have in there, especially since Chuck's Z is the only one I've been under for an extended amount of time.
What I don't have a good feeling for is the extra 1" in diameter.
|
According to my go to wheel fitment web site, the overall diameter of the 20" set-up is closer in spec to the factory overall diameter than my current set-up.
Front 0.83% different from stock
Rear -0.57% different from stock
These particular wheels only come in 20" the offsets and sizes I listed are the best option I can figure out.
We all agree the rears are no problem. The front will probably rub... rub what? and how badly?