Nissan 370Z Forum - View Single Post

Mick714 · 09-11-2013, 05:21 PM

Hi I bought a PWJDM cooling plate and was a bit surprised
It has less than half of the mounting holes that the OEM one does
It covers up the windshield washer reservoir fill cap
and it looks like I will have to get the dremel out to modify
the center section as it is too narrow to fit over the radiator brace

Has anyone else had these issues.

I thought pwjdm was a quality manufacturer

So far I have had poor quality from several aftermarket parts manufacturers
Seibon is pure crap I bought a lip and 3 times it came cracked
I bought a Greddy cat back and it doesn't have an expandable section so when it gets hot the pipe grows in length and the resonator hits my sway bar
now this from PWJdm

09-11-2013, 05:21 PM	#1 (permalink)
Mick714 Base Member Join Date: Oct 2011 Location: Central NJ Posts: 27 Drives: 2011 370Z Silver 6sp Rep Power: 13	Password JDM cooling plate install Hi I bought a PWJDM cooling plate and was a bit surprised It has less than half of the mounting holes that the OEM one does It covers up the windshield washer reservoir fill cap and it looks like I will have to get the dremel out to modify the center section as it is too narrow to fit over the radiator brace Has anyone else had these issues. I thought pwjdm was a quality manufacturer So far I have had poor quality from several aftermarket parts manufacturers Seibon is pure crap I bought a lip and 3 times it came cracked I bought a Greddy cat back and it doesn't have an expandable section so when it gets hot the pipe grows in length and the resonator hits my sway bar now this from PWJdm __________________ 2011 Brilliant Silver, Touring,Sport, Navigation KW Coilovers, Eibach Sways, HKS Short Ram Rear Fog Light, Nismo S-Tune Front Lip, Greddy Cat Back Exhaust, 20" Vossen VVSCV7's