so its not as simple as just plugging in a female 3.5MM. you need to know which wire is which...
from the instruction manual
If you are using an Eclipse or Kenwood radio, plug the female 3.5mm
connector with the Brown and Brown/White wires into the male 3.5mm connector of the
ASWC-1 harness.
* For Kenwood radios or JVC’s with the Blue yellow wire: Connect the
Kenwood/JVC SWC wire (normally Blue/Yellow) to the Brown wire of the ASWC-1. Isolate and tape the Brown/White wire, it will not be used.
|