Nissan 370Z Forum - View Single Post - Custom A-Pillar gauge pod

GaleForce · 12-28-2012, 11:10 PM

Here are some good finished pictures of my custom built A-Pillar gaugge pod. The only "off the shelf" parts used were a Nissan A-Pillar and Nissan silver gauge trim ring.

For those interested, I posted up some pictures of my gauge pod as I was making it in my build thread.

Close up of the fit and finish,

I need to remove the dash to replace the factory triple gauge with some Defi gauges, then I'll install this and post up installed pictures.

Here's another version. I added carbon fibre,

Ok, I put the A-Pillar in place and took some proper pictures for those who wanted to see it installed.

IMG_8003 by J M Gale, on Flickr

IMG_8016 by J M Gale, on Flickr

IMG_8030 by J M Gale, on Flickr

IMG_8036 by J M Gale, on Flickr

Dual gauge pod,

IMG_8211 by J M Gale, on Flickr

IMG_8197 by J M Gale, on Flickr

IMG_8200 by J M Gale, on Flickr

This is V.2 Premium Dual gauge pod that I recently made.

Here is how it looks through the windshield,

A couple interior shots,

Hybrid set-up. 52mm gauge top, 60mm boost controller bottom,

12-28-2012, 11:10 PM	#1 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Custom A-Pillar gauge pod - lots of pictures Here are some good finished pictures of my custom built A-Pillar gaugge pod. The only "off the shelf" parts used were a Nissan A-Pillar and Nissan silver gauge trim ring. For those interested, I posted up some pictures of my gauge pod as I was making it in my build thread. Close up of the fit and finish, I need to remove the dash to replace the factory triple gauge with some Defi gauges, then I'll install this and post up installed pictures. Here's another version. I added carbon fibre, Ok, I put the A-Pillar in place and took some proper pictures for those who wanted to see it installed. IMG_8003 by J M Gale, on Flickr IMG_8016 by J M Gale, on Flickr IMG_8030 by J M Gale, on Flickr IMG_8036 by J M Gale, on Flickr Dual gauge pod, IMG_8211 by J M Gale, on Flickr IMG_8197 by J M Gale, on Flickr IMG_8200 by J M Gale, on Flickr This is V.2 Premium Dual gauge pod that I recently made. Here is how it looks through the windshield, A couple interior shots, Hybrid set-up. 52mm gauge top, 60mm boost controller bottom, __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z Last edited by GaleForce; 10-10-2013 at 08:43 PM.