Nissan 370Z Forum - View Single Post

SS_Firehawk · 12-07-2012, 12:21 PM

Thanks guys. I'm really trying to find relevant stuff to post for the community as well as build some excitement. When the last guy pulled out of the twin SC project, I was deflated that it didn't culminate to anything. So I started looking all over to see what was my best options were. I literally had trouble finding a way forward. What makes it worse is being out here, I have hours to ponder about what to do. I planned so far out ahead, that it came as a shock that I can do this now. Not only that, but be the first to explore new ground, build some hype around this project, get feedback, really give something back to the community. I learned a lot just reading everyone's experiences. I try to post all my experiments and findings, anything to give back.

There aren't very many members that run LTH's or shorties for that matter. Any info on their performance is worth a lot to a few.

People running LTH's and a HFC/ HFC's I can count on two fingers. Myself and Mike Bonani. But at least there is information on how it performs, and that it's even an option.

There are only a handful of guys running full breather mods and an M370 manifold. What we post gives insight to other members what to expect. There are only a couple tuned results on this as well.

We now know what a franken-exhaust sounds like that was pieced together by three different companies. It tames the rasp from the PPE's! And sounds like a liter bike ROFL

EDIT: Removed some stuff, editing with questions.

Tanabe Z40 coilovers. I want to tighten up the stock setup, but I don't want to compromise the ride that most coilovers end up doing. These still use twin tube shocks and have a couple inches of height adjustment without affecting stroke or preload. They are not as aggressive as monotubes, but I think these will give me the improvement and adjustability I'm looking for. Stiffer, but not punishing. Any thoughts/inputs?

Opinions: 19x11 +18 Rear and 19x9.5 +15/ or 19x10.5 +22 fronts (not sure if this will fit)

Link to the rims.

New WORK Emotion Kiwami - 19" with Ultra Deep Concave - $2300 Only !

I want them in GT silver wrapped in some RE-11's. I've always liked them, and finally them make them in big boy sizes.

12-07-2012, 12:21 PM	#35 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Thanks guys. I'm really trying to find relevant stuff to post for the community as well as build some excitement. When the last guy pulled out of the twin SC project, I was deflated that it didn't culminate to anything. So I started looking all over to see what was my best options were. I literally had trouble finding a way forward. What makes it worse is being out here, I have hours to ponder about what to do. I planned so far out ahead, that it came as a shock that I can do this now. Not only that, but be the first to explore new ground, build some hype around this project, get feedback, really give something back to the community. I learned a lot just reading everyone's experiences. I try to post all my experiments and findings, anything to give back. There aren't very many members that run LTH's or shorties for that matter. Any info on their performance is worth a lot to a few. People running LTH's and a HFC/ HFC's I can count on two fingers. Myself and Mike Bonani. But at least there is information on how it performs, and that it's even an option. There are only a handful of guys running full breather mods and an M370 manifold. What we post gives insight to other members what to expect. There are only a couple tuned results on this as well. We now know what a franken-exhaust sounds like that was pieced together by three different companies. It tames the rasp from the PPE's! And sounds like a liter bike ROFL EDIT: Removed some stuff, editing with questions. Tanabe Z40 coilovers. I want to tighten up the stock setup, but I don't want to compromise the ride that most coilovers end up doing. These still use twin tube shocks and have a couple inches of height adjustment without affecting stroke or preload. They are not as aggressive as monotubes, but I think these will give me the improvement and adjustability I'm looking for. Stiffer, but not punishing. Any thoughts/inputs? Opinions: 19x11 +18 Rear and 19x9.5 +15/ or 19x10.5 +22 fronts (not sure if this will fit) Link to the rims. New WORK Emotion Kiwami - 19" with Ultra Deep Concave - $2300 Only ! I want them in GT silver wrapped in some RE-11's. I've always liked them, and finally them make them in big boy sizes. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 04-25-2013 at 09:55 PM.