Quote:
Originally Posted by gdk2080
Thanks for your reply Brian, I'm using a DPDT(slider) Please see attached.
I redirected the Parking Brake connection by connecting the Ground wire to the metal next to the Parking Brake lever(please see image No. 3), but it doesn't seem working. Where would be the best place to connect this Ground wire to?
Thanks alot!!!
|
It doesn't matter where you ground it, the point just needs to be a ground. The point you show should be a good ground, but you can always check with a meter and check continuity between that point and a know ground point. The connection with your added call-out should be the connection going to ground shown in your 3rd picture, so from the switch to ground.
Can you send a picture of how you have wired the back of the switch? I think that is more likely to be the issue.