Quote:
Originally Posted by DIGItonium
The best my dealer could do was take it close to -2.5 camber on both sides. Before it was -3.0. This morning (roughly 1.5 weeks of the springs settling), I wedged a credit card underneath the rear tire and was able to push the whole thing in. 
I did the same test for the front wheels (-1.5 and -1.6), and it barely made it past the roll.
I think I will probably shoot for something close to -1.2 for the rears with the camber kit (not sure about toe bolts) and leave the front wheels alone. |
My alignment specs were pretty much on par with yours, -1.5, -1.6 in front and -3.1 in the rears. Stock specs have a -1 degree difference between front and rear so the guy at my shop recommended I follow that to keep the handling similar to stock. Toe he was able to get in spec.
So right now i'm at -1.5, -1.6 front and -2.6 on the rears. I don't think I'm going to get a camber kit as I don't mind the current alignment and the car handles fine for me. It might be a little on the high side but it's fine for me.