Desperate for help with spacers

Nismo358 · 05-27-2014, 10:32 AM

Alright so I just recently dropped my Z34 Nismo on stance coils about 2 inches. Naturally the stock Nismo wheels have sunken in and I can't stand looking at them. I've been reading and asking people about their setups but still can't figure what size spacers I'll need. Does anyone have any suggestions or know what size they've ran on Z34 Nismo wheels? I don't want to rub every time I go over a bump. Current I'm running 245/40/19 +40 front and 275/35/19 +23 rear.
I have a set of Ichiba 15mm bolt on spacers which I bought brand new and haven't put them on yet cuz I haven't made up my mind if I'll need a different size or not.
I'm open to any suggestion you all can provide. Thanks in advance!

kenchan · 05-27-2014, 11:14 AM

might want to search in the nismo section. ive seen several nismo's using spacers.

Grindkiezer · 05-27-2014, 11:15 AM

You know you can check with a ruler right?

kenchan · 05-27-2014, 11:52 AM

you could on the rear, but rubbing on the fender liner is difficult to measure with just a ruler...

Grindkiezer · 05-27-2014, 12:31 PM

Quote:

Originally Posted by kenchan

you could on the rear, but rubbing on the fender liner is difficult to measure with just a ruler...

The issues with rubbing in the front wheel wells is a combination of how slammed you want to be and how wide/cambered you want, so you could measure with a ruler and just compensate with how low you sit or how much camber you want

kenchan · 05-27-2014, 12:50 PM

sure on paper it looks easy. not so easy in real world.

easier to just ask someone that has a working setup.

05-27-2014, 10:32 AM	#1 (permalink)
Nismo358 Base Member Join Date: May 2014 Location: Des Plaines, IL Posts: 92 Drives: 2010 Nissan 370z Rep Power: 10	Desperate for help with spacers Alright so I just recently dropped my Z34 Nismo on stance coils about 2 inches. Naturally the stock Nismo wheels have sunken in and I can't stand looking at them. I've been reading and asking people about their setups but still can't figure what size spacers I'll need. Does anyone have any suggestions or know what size they've ran on Z34 Nismo wheels? I don't want to rub every time I go over a bump. Current I'm running 245/40/19 +40 front and 275/35/19 +23 rear. I have a set of Ichiba 15mm bolt on spacers which I bought brand new and haven't put them on yet cuz I haven't made up my mind if I'll need a different size or not. I'm open to any suggestion you all can provide. Thanks in advance!

05-27-2014, 11:15 AM	#3 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 13	You know you can check with a ruler right? __________________ Z

05-27-2014, 12:50 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	sure on paper it looks easy. not so easy in real world. easier to just ask someone that has a working setup. Z-Girl 12 and SoLif3Lik3 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Desperate for clutch bleeding help	Pheonix	Engine & Drivetrain	22	05-10-2014 02:21 AM
Desperate Much....????? LOL	osirus	Nissan 370Z General Discussions	33	11-28-2013 03:27 PM
[FOR SALE] 30mm Ichiba V2 Hubcentric Wheel Spacers with Hub Centric Rings / Built In spacers	HenryLee	Parts for sale (Private Classifieds)	4	09-20-2013 02:31 PM
[WTB] !!!desperate!!!	dP3NGU1N	Parts for sale (Private Classifieds)	11	04-27-2013 04:24 AM
New Kid in Town but Desperate to Own a Z car	tb_IGM	New Forum Member	3	05-07-2009 08:40 AM

05-27-2014, 11:14 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	might want to search in the nismo section. ive seen several nismo's using spacers.

05-27-2014, 11:52 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	you could on the rear, but rubbing on the fender liner is difficult to measure with just a ruler...