Thoughts on a square 275 setup on the stock Rays

synolimit · 08-29-2013, 11:18 AM

Quote:

Originally Posted by PharmDZ

Hey everyone - I did plenty of searching and wasn't able to come up with any good info on running square setups on the stock 19" rays (maybe with good reason? hah). I've been getting into auto-x and also have a few road course events planned. I was initially looking into getting a set of Enkei RPF1's in 18x10 square with 285's but I'm just exploring other options as of now. I know the AD08's, RE11's, and the Direzza II's come in 275/35-19. Any thoughts on this? Has anyone used the new star spec II's? They're about $150-200 cheaper for a set of 4 compared to the other two tires. Any input is welcome - thanks.

18x10 is a bad choice because of the offset. You'll need spacers for both deleting the purpose of the rpf1. The rear is a perfect fit with the 10.5 +15! Now the front you'll need a 9.5". +15 is going to stick out pretty far past the fender so I'd get the +38 or +45. If you go +45 you'll need a 15-20mm spacer. If you go +38 you'll need a 10-15mm. With a 9.5" wheel you can go max 285 so your wheels don't have to be square anyways.

Depending on that I'm not sure if you can do a 285 up front. Pretty sure a 275 is no problem. I'm inerested to know because I want square now too. At the moment I have a 285/255. If I can't do 285 then ill do 285/275, close enough.

Also look into the nitto nt01

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19 inch square setup	lhinojos	Wheels & Tires	11	03-24-2015 11:49 AM
[FOR SALE] Vossen CV3 Square Setup	NOFATCHX	Parts for sale (Private Classifieds)	32	03-16-2015 08:21 PM
Staggered or square setup?	sojirovskensi	Nissan 370Z General Discussions	34	07-30-2012 04:28 AM
RAYS RE30 - 19x11.0 Square Setup 21.6 Lbs Per Wheel \|\| Super Clearance Price	RavSpec	RavSpec - JDMwheel	0	11-04-2011 01:58 PM
anyone running this setup on stock 19 inch rays?	BlackCherryZ	Wheels & Tires	0	02-09-2010 10:54 PM