Drilling a bolt pattern.

cooltoy · 08-08-2013, 05:17 PM

There is a set of wheels I am considering and the manufacturer is currently not making the front wheel in the 5x114.3 bolt pattern (they do for the rear wheel).

They are saying that they will re-drill a 5x112 wheel to the desired bolt pattern.

Is that a good idea? Are there any safety issues? They are saying that if it was unsafe, they would not offer the option to me.

Thank you.

Zbrah · 08-08-2013, 05:44 PM

If you're not comfortable with the process, look into custom wheel adapters, they're like spacers but will also allow you to fit different bolt pattern wheels across any cars.

check here for more details Wheel Adapters, Wheel Spacers, Hub Centric Rings | Motorsport Tech

SouthArk370Z · 08-08-2013, 05:51 PM

If they are willing to re-drill a finished wheel, why wouldn't they just drill a "blank" to your specs?

vividracing · 08-08-2013, 06:48 PM

Redrilling wheels the proper way with a steel insert would be no problem at all, with the proper hubcentric rings you should avoid any vibration issues as well. Alot of 5x112 cars take a high offset rather than what the Z can fit tho. I would double check fitment and go for it if the deal is worth it.

kenchan · 08-08-2013, 07:51 PM

5x114.3

cooltoy · 08-08-2013, 08:46 PM

Quote:

Originally Posted by Zbrah

If you're not comfortable with the process, look into custom wheel adapters, they're like spacers but will also allow you to fit different bolt pattern wheels across any cars.

check here for more details Wheel Adapters, Wheel Spacers, Hub Centric Rings | Motorsport Tech

Thanks, good idea. I don't know if I want to push the wheels out any further.

vividracing · 08-09-2013, 11:21 AM

Quote:

Originally Posted by kenchan

5x114.3

Yep, the OP was saying he was considering redrilling 5x112 wheels. Most Audi/Mercedes fitment (5x112) is a bit weaker. Regardless, when done properly I think redrilling is a viable option rather than a 15mm spacer aesthetically.

Zbrah · 08-09-2013, 11:37 AM

Yup, I've came across a few guys that had to redrilled their wheels and seem to holding up just fine, but they don't track their cars or do any hard driving so who knows, just make sure it's done by reputable shop.

And knowing most German cars have weak offsets so really depending on the wheels he's going for the adapters may be a good option.

Zbrah · 08-09-2013, 11:39 AM

Quote:

Originally Posted by cooltoy

Thanks, good idea. I don't know if I want to push the wheels out any further.

What, no Hella Flush?

want to share what wheels are you're planning to run?

cooltoy · 08-09-2013, 12:50 PM

I am looking at two options.

1. Vossen CV2's which are plug and play.
2. Gianelle Yerevan Lightweights - these are the ones need to be drilled.

kenchan · 08-09-2013, 01:02 PM

cv2's are ones i was thinking about getting on my G35C... but they are heavy a hell. like 30lbs

so i need to find light weight tires to run them. cheap i found was sumi htrzIII's in G's size. i dont care about high performance on the G as it's my summer dd and mostly dressup car.

Zbrah · 08-09-2013, 01:13 PM

What size and offsets for the Gianelle? I'm really liking this design over the CV2

cooltoy · 08-09-2013, 01:51 PM

Me too.

Front

20x9 +25 (These are the ones that need to be re drilled) or 20x8.5 +35 (available in 5x114.3)

Rear

20x10.5 +25 (available in 5x114.3)

cooltoy · 08-09-2013, 01:53 PM

Quote:

Originally Posted by kenchan

cv2's are ones i was thinking about getting on my G35C... but they are heavy a hell. like 30lbs

so i need to find light weight tires to run them. cheap i found was sumi htrzIII's in G's size. i dont care about high performance on the G as it's my summer dd and mostly dressup car.

I have no idea the weight of the Yerevan. I think they are two piece.

Zbrah · 08-09-2013, 02:33 PM

Quote:

Originally Posted by cooltoy

Me too.

Front

20x9 +25 (These are the ones that need to be re drilled) or 20x8.5 +35 (available in 5x114.3)

Rear

20x10.5 +25 (available in 5x114.3)

I'd go with the 20x9 and redrill since they offer that to you at no extra charge. what size tires are you going with? 255 & 285?

08-08-2013, 05:17 PM	#1 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Drilling a bolt pattern. There is a set of wheels I am considering and the manufacturer is currently not making the front wheel in the 5x114.3 bolt pattern (they do for the rear wheel). They are saying that they will re-drill a 5x112 wheel to the desired bolt pattern. Is that a good idea? Are there any safety issues? They are saying that if it was unsafe, they would not offer the option to me. Thank you.

08-08-2013, 05:51 PM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	If they are willing to re-drill a finished wheel, why wouldn't they just drill a "blank" to your specs? DEpointfive0 likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

08-08-2013, 06:48 PM	#4 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	Redrilling wheels the proper way with a steel insert would be no problem at all, with the proper hubcentric rings you should avoid any vibration issues as well. Alot of 5x112 cars take a high offset rather than what the Z can fit tho. I would double check fitment and go for it if the deal is worth it. dirTy_shoeZ likes this. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

08-08-2013, 07:51 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	5x114.3 Footloose301 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New 18" 150x5 bolt pattern Tundra rim/tire combo	O&G	Misc Items for sale (No Z stuff)	2	04-28-2012 12:31 PM
Special Release - Work Wheels Brombacher in 5x114.3 Bolt Pattern!	DriveLineEric	Tires/Wheels	30	12-20-2010 12:21 PM
z34 6speed trans bolt pattern	1uk32	Engine & Drivetrain	1	12-29-2009 08:53 AM
$600-Enkie PK6 18x8.5 ET 25 and 18x9.5 ET 24 114.3 bolt pattern	laze1	Parts for sale (Private Classifieds)	6	11-20-2009 06:04 PM
Bolt pattern?	370ZINMO	Wheels & Tires	10	12-14-2008 09:13 PM

08-08-2013, 05:44 PM	#2 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	If you're not comfortable with the process, look into custom wheel adapters, they're like spacers but will also allow you to fit different bolt pattern wheels across any cars. check here for more details Wheel Adapters, Wheel Spacers, Hub Centric Rings \| Motorsport Tech

08-09-2013, 11:37 AM	#8 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	Yup, I've came across a few guys that had to redrilled their wheels and seem to holding up just fine, but they don't track their cars or do any hard driving so who knows, just make sure it's done by reputable shop. And knowing most German cars have weak offsets so really depending on the wheels he's going for the adapters may be a good option.

08-09-2013, 12:50 PM	#10 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	I am looking at two options. 1. Vossen CV2's which are plug and play. 2. Gianelle Yerevan Lightweights - these are the ones need to be drilled.

08-09-2013, 01:02 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	cv2's are ones i was thinking about getting on my G35C... but they are heavy a hell. like 30lbs so i need to find light weight tires to run them. cheap i found was sumi htrzIII's in G's size. i dont care about high performance on the G as it's my summer dd and mostly dressup car.

08-09-2013, 01:13 PM	#12 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	What size and offsets for the Gianelle? I'm really liking this design over the CV2

08-09-2013, 01:51 PM	#13 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Me too. Front 20x9 +25 (These are the ones that need to be re drilled) or 20x8.5 +35 (available in 5x114.3) Rear 20x10.5 +25 (available in 5x114.3)