20x9 +0 front wheels and H&R springs, anyone? Help please

BrandonSS · 08-13-2013, 03:20 PM

The search wont allow a search of +0 so does anyone have a wheel up front with the same specs?

Also I might as well throw this in as well, i see a lot of guys on here with H&R springs that are lower than me in the rear. What did you do to the rear to get it as low as you did??

BrandonSS · 08-15-2013, 11:33 PM

Bump. I did a test fit tonight... Not so sure I can pull them off...

cooltoy · 08-15-2013, 11:35 PM

I didn't think so.

BrandonSS · 08-16-2013, 09:32 AM

I think it will be close with a 15mm spacer instead of my 20mm spacer. The wheels specs are 20x9 +15. So with my 20mm on there it is a -5. There isnt enough clearance to run a 10mm or else I'm positive it would work. The rear is no problem at all.

The wheel is slightly turned to the right. I should have straightened it up but you get the idea. It's also not quite all the way down since I couldnt roll it out being there is no tire.

Again wheel is turned outward just a hair to it appears to poke more than it would.

I planned to run a 245/30/20 up front and a 285/30/20 out back. Slightly off from stock size.

BrandonSS · 08-16-2013, 10:26 AM

I've found a few aggressive fitments on here such as:

Front: 20x9.5 +6 (+1 with 5mm spacer)
Rear: 20x10.5 -12
Yokohama S-Drives 225/35 and 255/35. They run a little wider than other brands.
http://www.the370z.com/wheels-tires/...ml#post2315181

I think it might work just fine with a 245/30/ front tire and my plan of 285 or 275 in the rear. Rear specs are 20x11 +15 but I do still have my 20 and 25mm spacers to play with to match the front's stance if needed.

08-13-2013, 03:20 PM	#1 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	20x9 +0 front wheels and H&R springs, anyone? Help please The search wont allow a search of +0 so does anyone have a wheel up front with the same specs? Also I might as well throw this in as well, i see a lot of guys on here with H&R springs that are lower than me in the rear. What did you do to the rear to get it as low as you did??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] FOrgestar F14s 20x9.5 20x12 BRONZE BURST w tires and tpms, WHEELS never used	bmccann101	Parts for sale (Private Classifieds)	6	03-31-2013 02:05 AM
[FOR SALE] 20" Rohana RC10 Concave Wheels 20x9 20x11	isDatiT	Parts for sale (Private Classifieds)	47	02-15-2013 11:19 AM
[FOR SALE] NEW 20x9.5 +25 20x10.5 +22 CONCAVE Wheels CHEAP!	Drift Motion	Parts for sale (Private Classifieds)	33	11-27-2012 02:42 PM
[FOR SALE] 20" Black Axis Penta Wheels/Tires! 20x9/20x10 +25	gromano	Parts for sale (Private Classifieds)	31	08-28-2011 11:13 PM
My New 3 piece Forgiato Wheels 20x12 rear and 20x9.5 front	nextlevel2k1	Wheels & Tires	8	09-09-2009 06:58 PM

08-15-2013, 11:33 PM	#2 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	Bump. I did a test fit tonight... Not so sure I can pull them off...

08-15-2013, 11:35 PM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	I didn't think so.

08-16-2013, 09:32 AM	#4 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	I think it will be close with a 15mm spacer instead of my 20mm spacer. The wheels specs are 20x9 +15. So with my 20mm on there it is a -5. There isnt enough clearance to run a 10mm or else I'm positive it would work. The rear is no problem at all. The wheel is slightly turned to the right. I should have straightened it up but you get the idea. It's also not quite all the way down since I couldnt roll it out being there is no tire. Again wheel is turned outward just a hair to it appears to poke more than it would. I planned to run a 245/30/20 up front and a 285/30/20 out back. Slightly off from stock size.

08-16-2013, 10:26 AM	#5 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	I've found a few aggressive fitments on here such as: Front: 20x9.5 +6 (+1 with 5mm spacer) Rear: 20x10.5 -12 Yokohama S-Drives 225/35 and 255/35. They run a little wider than other brands. http://www.the370z.com/wheels-tires/...ml#post2315181 I think it might work just fine with a 245/30/ front tire and my plan of 285 or 275 in the rear. Rear specs are 20x11 +15 but I do still have my 20 and 25mm spacers to play with to match the front's stance if needed.