Need help with tire fitment on 20x10.5 for front!

NOFATCHX · 02-24-2013, 11:16 PM

I'm currently on CV3s with an H&R spring drop,

20x9 +25 up front w 245/35 tire and 5mm spacer
20x10.5 +15 on rear w 285/30 tire and 20mm spacer

I'm going to be ordering (2) 20x10.5 +15 for the front and will be dropping ride height even further on BC coil overs... What sized tire can I use on these front wheels? At current ride height it doesnt seem 275 would fit up front but with lower ride height and some more negative camber would it?

Thanks!

bullitt5897 · 02-25-2013, 08:17 AM

Whats your end goal?

We have seen japanese tuners do the 10.5 but their lowest offset was a +22 and a 265 tire...

Since your going with a full square setup here is what your looking at.

Your new fronts will sit approximately 28mm+ out from your current front wheel setup... typically, people run a 9.5 +15 with a 255 front. A 255 or 265 would be my starting point and this is going to depend on tire brand as well...

NOFATCHX · 02-25-2013, 11:42 AM

Want to be low and wide, mild poke, car is a daily driver so i dont want to stretch aggressively, tho a bit is acceptable. Maybe a +25 offset on 10.5 would be more realistic. I have the 20x9 +20 im front now but its practically a flat wheel with no concave, I want a deeper concave on front. I'm going to test fit my 20x10.5 +15 on the front get a better idea. I've researched tire sizes, doesn't seem 265 is a very common size however 255 is readily available.

There is a Z that claims to have the 10.5 all around with +15 offset but it can't be confirmed, the fact that he can't remember his tire sizes makes me a bit hesitant in believing.

NOFATCHX · 02-25-2013, 11:45 AM

This car is 20x10.5 all around and claims +15 all around. Vossen couldn't confirm and said it could possibly be +25 on front. Vossens square looking setup on the G37 is +25 on front +15 on rear, I kno our front fenders are rider so wasn't sure if that'd make a diff

NOFATCHX · 02-25-2013, 11:46 AM

chrischhorn · 02-25-2013, 12:08 PM

Quote:

Originally Posted by NOFATCHX

That's square but definitely not same offsets all the way around. You can easily tell from the difference in concave between front and rear. I want to run the TC-105n's in a square set up at 18x10.5 +12 but it would definitely require fender work as running track wheels with extreme camber is kind of counter productive....

NOFATCHX · 02-25-2013, 12:18 PM

Quote:

Originally Posted by chrischhorn

That's square but definitely not same offsets all the way around. You can easily tell from the difference in concave between front and rear. I want to run the TC-105n's in a square set up at 18x10.5 +12 but it would definitely require fender work as running track wheels with extreme camber is kind of counter productive....

I've looked at various angles of this car, some angles look square some look slightly off.

chrischhorn · 02-25-2013, 12:23 PM

Quote:

Originally Posted by NOFATCHX

I've looked at various angles of this car, some angles look square some look slightly off.

There's one guy I know that pulled off 18x10.5 +15 all the way around but he rolled his fenders like CRAZY. Not sure if Corbin still lurks on the forums as he has sold his Z.

bullitt5897 · 02-25-2013, 12:31 PM

10.5 +25 is safe for daily and u can run 265 on it I believe...

OMGWTFBBQ · 02-25-2013, 04:21 PM

I used to run 18x10 +15 255/40 all around with a 30mm spacer in the rear if that matters. Lowered on KWV3. -2 degrees of camber in the front. Rolled fenders/trimmed fender tabs and liner. No rubbing.

diego@vossen · 02-25-2013, 05:00 PM

20x10.5 +25 is an aggressive fit for the front on the 370Z. I myself have a G37s Coupe and I am currently running 20x10.5 +15 up front with 255/30/20 and -3.6 camber, slammed to. On the Z yes you have more room to play with but even a +25 you are looking at 255/265 and possibly running negative camber and rolling fenders. It can be done, but certainly not recommended by us. I also ran a +25 before with a Falken 275/30/20 and also had a 265/30 +25 with -1.4 camber which was a better fit for a DD.

If i had a 370z I would probably attempt the +25 with 265/30 and slight negative camber, but again it's not recommended unless the customer is willing to "make it work"

bullitt5897 · 02-25-2013, 07:24 PM

^^^ my point exactly

NOFATCHX · 02-25-2013, 10:06 PM

Makes plenty of sense. Def going to be slammed and I expect negative camber. 265 doesn't seem as available as 275 or 255. The 275 fit up front okay with negative camber and drop? I'm fearful a 255 will expose wheel to road wear, I had a 275 on rear and the gunmetal finish on the lip took a beating from road debris. If anything, trimming or removing the fender liner seems a necessity if I go any lower...

bullitt5897 · 02-25-2013, 10:49 PM

275 would require major trimming and camber!

NOFATCHX · 02-25-2013, 11:11 PM

Okay so guess my question is... What's the best way to fit a deeper concave wheel on front?
20x10.5 +25 offset with 265 or 255 tire. Diego is there a 20x9 offered with a better offset for more concave goodness?

Thanks for the input guys!

02-24-2013, 11:16 PM	#1 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Need help with tire fitment on 20x10.5 for front! I'm currently on CV3s with an H&R spring drop, 20x9 +25 up front w 245/35 tire and 5mm spacer 20x10.5 +15 on rear w 285/30 tire and 20mm spacer I'm going to be ordering (2) 20x10.5 +15 for the front and will be dropping ride height even further on BC coil overs... What sized tire can I use on these front wheels? At current ride height it doesnt seem 275 would fit up front but with lower ride height and some more negative camber would it? Thanks! __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-25-2013, 08:17 AM	#2 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Whats your end goal? We have seen japanese tuners do the 10.5 but their lowest offset was a +22 and a 265 tire... Since your going with a full square setup here is what your looking at. Your new fronts will sit approximately 28mm+ out from your current front wheel setup... typically, people run a 9.5 +15 with a 255 front. A 255 or 265 would be my starting point and this is going to depend on tire brand as well... NOFATCHX likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2013, 11:42 AM	#3 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Want to be low and wide, mild poke, car is a daily driver so i dont want to stretch aggressively, tho a bit is acceptable. Maybe a +25 offset on 10.5 would be more realistic. I have the 20x9 +20 im front now but its practically a flat wheel with no concave, I want a deeper concave on front. I'm going to test fit my 20x10.5 +15 on the front get a better idea. I've researched tire sizes, doesn't seem 265 is a very common size however 255 is readily available. There is a Z that claims to have the 10.5 all around with +15 offset but it can't be confirmed, the fact that he can't remember his tire sizes makes me a bit hesitant in believing. __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-25-2013, 11:45 AM	#4 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	This car is 20x10.5 all around and claims +15 all around. Vossen couldn't confirm and said it could possibly be +25 on front. Vossens square looking setup on the G37 is +25 on front +15 on rear, I kno our front fenders are rider so wasn't sure if that'd make a diff __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-25-2013, 11:46 AM	#5 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	__________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-25-2013, 12:31 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	10.5 +25 is safe for daily and u can run 265 on it I believe... __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2013, 04:21 PM	#10 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	I used to run 18x10 +15 255/40 all around with a 30mm spacer in the rear if that matters. Lowered on KWV3. -2 degrees of camber in the front. Rolled fenders/trimmed fender tabs and liner. No rubbing.

02-25-2013, 05:00 PM	#11 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 13	20x10.5 +25 is an aggressive fit for the front on the 370Z. I myself have a G37s Coupe and I am currently running 20x10.5 +15 up front with 255/30/20 and -3.6 camber, slammed to. On the Z yes you have more room to play with but even a +25 you are looking at 255/265 and possibly running negative camber and rolling fenders. It can be done, but certainly not recommended by us. I also ran a +25 before with a Falken 275/30/20 and also had a 265/30 +25 with -1.4 camber which was a better fit for a DD. If i had a 370z I would probably attempt the +25 with 265/30 and slight negative camber, but again it's not recommended unless the customer is willing to "make it work" batman_4, bullitt5897 and NOFATCHX like this. Last edited by diego@vossen; 02-26-2013 at 11:22 AM.

02-25-2013, 07:24 PM	#12 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	^^^ my point exactly __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2013, 10:06 PM	#13 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Makes plenty of sense. Def going to be slammed and I expect negative camber. 265 doesn't seem as available as 275 or 255. The 275 fit up front okay with negative camber and drop? I'm fearful a 255 will expose wheel to road wear, I had a 275 on rear and the gunmetal finish on the lip took a beating from road debris. If anything, trimming or removing the fender liner seems a necessity if I go any lower... __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-25-2013, 10:49 PM	#14 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	275 would require major trimming and camber! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2013, 11:11 PM	#15 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Okay so guess my question is... What's the best way to fit a deeper concave wheel on front? 20x10.5 +25 offset with 265 or 255 tire. Diego is there a 20x9 offered with a better offset for more concave goodness? Thanks for the input guys! __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z tire fitment	mpp9	Wheels & Tires	15	04-19-2018 02:58 PM
[FOR SALE] Vossen CV7 20x10.5 +25 with /without tire	endlessg37	Parts for sale (Private Classifieds)	0	09-09-2012 05:51 PM
Tire Fitment question	crazybeasty	Wheels & Tires	0	07-17-2011 03:40 PM
Tire fitment	mpp9	Wheels & Tires	0	10-04-2010 11:36 AM
can someone help me with tire fitment?	res0zsfa	Wheels & Tires	6	05-12-2010 01:18 PM