SSR 3-piece wheels: Professor MS3
 

http://www.ssr-wheels.com/images/ms3/gallery/1.jpg
http://www.ssr-wheels.com/images/ms3/gallery/2.jpg

19x9.5 +12 265/35/19
19x11 +11 305/30/19

what do you guys think? I haven't seen a whole lot of interest in these wheels so I thought I'd see if anyone would be interested in a GB or special sizing or anything like that.

nice wheels !

I might be interested. Depends on the wheel weight, and shipping to Canada.

These are my favorite wheel out there for the z

love the style of the rim, but they look small for 19s... do they have a stepped lip or something?

I'm looking for something in 18x12 and 18x10

Yeah they are step lip. We can do 20" so it looks bigger.

We can do 18x10 and 18x12 for the rears. Pmed you.

On a side note, here are some other cool SSR Wheels.


Type F
http://www.ssr-wheels.com/gallery/im...R+Type+F+3.jpg

MS1
http://www.ssr-wheels.com/gallery/im...b_ms1_370z.jpg

SP3
http://www.ssr-wheels.com/gallery/im...9ba08626_b.jpg

do you have pics of the op rim in 20s on anything?

What can you do on the SP3 in 19x9 and 19.10.5/11 shipped to 24014?

Here's 20×9.5 and 20×12 SP1 in SBC finish.

http://www.more-japan.com/blogs/wp-c...7-1024x768.jpg

^ i think he was looking for the ms3 on anything in 20...

Those 20"s are very nice wheels, but IMO too large for the car. The 19"s seem to fill the wheel wells just right.

I think 20s look good on a 370z

Yeah I couldn't find any of those in 20s on a 370Z. But due to the step lip, the face ends up looking like an 18.

yeah was looking to see those wheels in 20.... love the design, but not a fan of the step lips like that

Yeah unfortunately they didn't offer with reverse lip.

saw this on SSR's instagram. 20" MS3
Instagram

http://distilleryimage3.instagram.co...381b4856_7.jpg

that is such a sick mesh pattern

how much for a set of 20x10 20x12? What offset and disk will clear akebonos and give the most lip? Zip is 77449.

Ron, you didn't want to buy my wheels??:ugh2:

Good question about the disk and straight lip guys, I see your on swifts, what offset are you gonna roll with ?

Thanks jolly for the pic, my jaw dropped like dammmmnn !

That's my Baby, stay tuned for an official photoshoot!:stirthepot:

Looks great bro ! What size are those and are you on coilovers ?

What's the best price for ms3 shipped 19114 20x10.5/11 20x9/9.5

Thanks man, I'm on coilovers and specs are:
20x9.5 et 12
20x11 et -1:ughdance::driving:

:yum:

Love it 2 clean, so is op saying we can't get this lip anymore ? Negative offsets in rear. Does it poke ? And I wonder if rivet color can change.

Why what happened? I am looking for a step lip man. :(

I plan on getting kw v3s and trying run close to stock camber to keep it functional...so I was thinking 20x10 20x12 a +24 would be ok on the front but I dunno about the rear, on that size they go up to +24 as well. Also don't know if the disk that come with those offsets will clear the brakes.

The +24 front and rear with stock camber would probably work just fine. What tire sizes are you going for? 285 front and 325 out back?

275/325

I would go +20 on front and +12 on rear. If u are going the 275/325. With 10"/12" wheels. The +24 on rear might hit the strut under load. I am rolling with a +5 on rear with the 325 sitting at -3.1 camber just so it will clear the quarter panel. With this offset I only have about a fingers width between the wheel and strut under load. This is only if you r dropped about an inch. Stock ride height with the offset at +24 will work, but might stick out just a bit.

Price delivered to 33067 (SSR 3-piece wheels: Professor MS3)

Thank you. :tup:

Size looks good.

can we get these offset and lip options with you, im thinking of 5 offset for the rear. that negative -1 looks awesome too !

20x12 +24 with SL disk will clear the rear brakes. :tup:

pm replied

Yeah, we can get you step lip and whatever size/offset that its available. PM me exactly what you're looking for. ;)

how much of a lip will that give me?

edit: nvm I see it on the chart 119mm