What wheels are people running for AutoX?

whoady4shoady · 07-16-2012, 09:24 AM

Quote:

Originally Posted by ChrisSlicks

You can fit up to a 315 up front with no rub if you have the right wheels with the perfect offset. The ideal offset varies depending on how much camber you have.

On the stock Nismo wheels 285 or 295 all around would work pretty well I think.

I will be trying to stay in spec camber wise for the most part. I will be ordering spl arms for the rear to go with my swifts springs. From what i have read this should keep me in spec, and the front doesnt seem to need them. Thank you much Chris.

ChrisSlicks · 07-16-2012, 09:39 AM

Quote:

Originally Posted by whoady4shoady

I will be trying to stay in spec camber wise for the most part. I will be ordering spl arms for the rear to go with my swifts springs. From what i have read this should keep me in spec, and the front doesnt seem to need them. Thank you much Chris.

You'll probably gain about -0.5 degrees or a little more up front from the swifts which will be good and help tuck the fatter tires. You won't need camber arms unless you were trying to get extra camber up front.

whoady4shoady · 07-16-2012, 01:58 PM

Quote:

Originally Posted by ChrisSlicks

You'll probably gain about -0.5 degrees or a little more up front from the swifts which will be good and help tuck the fatter tires. You won't need camber arms unless you were trying to get extra camber up front.

I was pretty sure I would need the camber arms for the rear. Thats what I get from reading in the official swifts springs thread.

ChrisSlicks · 07-16-2012, 02:27 PM

Quote:

Originally Posted by whoady4shoady

I was pretty sure I would need the camber arms for the rear. Thats what I get from reading in the official swifts springs thread.

Camber gain in the rear will be much greater. Without camber arms in the rear you would be looking at -2.0 as the minimum.

whoady4shoady · 07-16-2012, 06:46 PM

Quote:

Originally Posted by ChrisSlicks

Camber gain in the rear will be much greater. Without camber arms in the rear you would be looking at -2.0 as the minimum.

ouch. Thanks for your knowledge. Do you think I should mess with any type of spacers on a square set up of 285/35?

ChrisSlicks · 07-16-2012, 07:40 PM

Quote:

Originally Posted by whoady4shoady

ouch. Thanks for your knowledge. Do you think I should mess with any type of spacers on a square set up of 285/35?

I would avoid the spacers if possible. Are you getting wheels with square offsets or staggered offset?

whoady4shoady · 07-17-2012, 12:50 AM

Quote:

Originally Posted by ChrisSlicks

I would avoid the spacers if possible. Are you getting wheels with square offsets or staggered offset?

Im new to all this, so Im not sure what you mean? I am putting the tires on the stock Nismo 19s.

Is this what you are looking for?

370Z NISMO Wheels and Yokohama ADVAN tires.
Lightweight forged aluminum-alloy 19" x 9.5" +40mm offset (front); 19" x 10.5" +23mm offset (rear) Weight: 20.5 lbs. (9.3kg) – front; 20.9 (9.5kg) – rear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What clutch are the turbo people running?	98intrigue	Forced Induction	60	03-01-2020 02:03 PM
Looking for some Zs for an autox run...?	mr_sk	North East Region	9	10-14-2011 04:25 PM
some autox	Red__Zed	Track / Autocross / Drifting / Dragstrip	3	09-27-2011 11:09 PM
Wheels - do people reckon OEM 19" Rays would be a great addition to Oz model	NissanZ46	Australia/New Zealand	19	09-08-2009 08:02 PM
Unhappy people watch TV, happy people read/socialize, says study	AK370Z	The Lounge (Off Topic)	4	11-16-2008 05:56 AM