After doing some calcs for a few days lol, I see why u went with those tire sizes, they are super close to stock tire specs, except for the width of course.

I don't think you wanna pm me your offsets, do you? ;)

Ron I would run a 20x10 +26 and 20x12 +28

This will not poke all that much and you can run the 275/325 combo you want to run.

That is very helpful, thank you. Aprox. how much of a lip will that get me?

Also, do you think that extra inch of height on those tires will make the car look raised? Or make them rub? ..Maybe I should go with the same tire size W.O.W went with but on the 10''/12'' wide wheels so I can go with conservative offsets.

Ron,

Lips would be approx
Front: 3" outer
Rear: 4.5" outer

It will raise it off the ground a little bit. I don't think it will be that noticeable.. (just lower it more :) )

325/35/20 gives you a 3.2" sidewall its not all that thin

here is a picture of a 325/25/20 on a 12

http://luxurysportlifestyle.com/wp-c...Gallardo-2.jpg

Available in 17-20 in step lip configuration

http://farm8.staticflickr.com/7219/7...bda3b8b5_b.jpg
F140-Brushed-Polished by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7071/7...f61a6017_b.jpg
F140-Brushed-Polished-lay by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7217/7...ac215b88_b.jpg
F140-Brushed-Polished-face by GetYourWheels.com, on Flickr

these are whoa! :happydance:

DESIGN 140 AG.FUNCTION

http://farm8.staticflickr.com/7233/7...8f46d1b7_b.jpg
F120-Technica-Titanium by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7075/7...3bb5e1d8_b.jpg
F120-Technica-Titanium-lay by GetYourWheels.com, on Flickr
http://farm9.staticflickr.com/8145/7...5230d195_b.jpg
F120-Technica-Titanium-hardware by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7218/7...22947567_b.jpg
F120-Technica-Titanium-finish by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7225/7...7522547f_b.jpg
F120-Technica-Titanium-face by GetYourWheels.com, on Flickr
http://farm8.staticflickr.com/7241/7...c5f6657e_b.jpg
F120-Technica-Titanium-back-detail by GetYourWheels.com, on Flickr

What would be a price for these in 19 X 9.5 and 19 X 10.5? Can you do a bronze lip?

VegasZ we can do a bronze lip no problem as these are custom made all here in the USA

Alittle render

http://i.imgur.com/puWcY.jpg

Price on the F110's and F140's.... 19x9.5/10.5

Pm on its way Johnnydc5

Porsche rendering on the 130

http://i.imgur.com/rsGfv.jpg

pm pricing please on 410/140 in 9.5 & 10.5

thanks