SSR Wheels Thread

[Mike_O_Nite]

Originally Posted by hrtbrknprince

I've spoken with Josh a few times and the actual offset that I wanted they don't carry anymore so I had to get my rear wheels from somewhere else.



I do plan on getting at least the fronts from kamispeed though. So the factory tpms will work then despite being smaller? I'm a bit unfamiliar with the band kit you're talking about

You’ll need to get all of the wheels drilled out, unless SSR offers that directly from the factory as an option.

The TPMS sensors will not fit if you don’t drill out the holes...the standard Schrader valve is just a little too wide to fit. Here’s the band kit that I got from Amazon to give you a better idea of what I’m talking about. White Knight TPMS22105 Stainless Steel Finish TPMS Strap Kit, (Set of 4) https://www.amazon.com/dp/B00B2FCQ86..._n-XfCb1K7N1HP

Hopefully though, if SSR can drill them to the Schrader valve/TPMS diameter, you can avoid all of that.

Hope that helps!