Offset recommendation

JZNx · 09-02-2011, 12:45 AM

Quote:

Originally Posted by djpathfinder

The OEM 19" Rays are:
19x9 +47, 19x10 + 30

At stock height it is popular to go with 20 mm front and 25 mm rear spacers to get a flush fitment. That makes the "effective offsets" F: +27 and R: +5. If you are keeping the suspension stock, and going to 19x9.5 and 19x10.5, the offsets you need to achieve the same look as what I stated above is: F: +31 and R: +11. For easy calculation, for every 1/2" increase in wheel width you are pushing the wheel out by 6 mm (equivalent to 1/4"). Therefore you must add 6 mm to your backspacing to compensate.

So this is how I have it translated in my little brain =)
So for stock height it is common to go with +20 in front and +25 in rear.
And adding a spacer in the rear to make it a flush fitment.
I am still bit confused about the effective offset =(;;
So if you want a regular fitment you wanna make it as close as to +31 in the front and +11 in the rear? Am I bit off?

Also how would like... 19x9.5 front and 19x10.5 and like +18 all around would look?
Sorry for keep asking but I still have hard time differentiating in between of flush and regular look=)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
some recommendation please	dudesky	Wheels & Tires	0	05-17-2011 12:32 AM
Car recommendation please	Mt Tam I am	Other Vehicles	23	11-24-2010 07:35 PM
Tire recommendation	jbush74	Wheels & Tires	51	08-30-2010 11:02 AM
HU Recommendation for DVD/HKS CAMP II/NAV	Mozen	Audio & Video	4	08-02-2010 03:54 PM
Recommendation for an SUV	molamann	Other Vehicles	24	08-19-2009 07:12 AM