1/4 Tires! What to get?

V8Killer · 08-04-2011, 01:51 AM

All right guys! I am new to this area so I wanted to know if someone could point me in the right direction. I typed in the search bar drag radials but nothing came up. Okay my car is N/A with blah blah blah mods. My car will have RE-11's in about two weeks. Now there is a local club in my area that is doing an event soon and they listed a few tires that are accepted to run in the event.

DOT approved street tires example Nitto’s NT555R, Mickey Thompson ET streets, or Hoosiers QTP. Note: TIRES MUST BE DOT APPROVED.

I would assume if I get some of the listed above I should go to a smaller rim than my Ray's correct? Experience, would help a lot in this as to I don't know much about what to get. I do want to run in the event as I am 1 out of 3 imports in the club as to a bunch of Camaro's and Trans Ams. So should I upgrade and if so to what? Or should I just stick with my RE-11s.

DarkZide · 08-04-2011, 08:01 AM

ET Streets.

One_Quick_Z · 08-04-2011, 08:11 AM

Yes most of those tires you listed will only fit 18" wheels or smaller.... maybe look into Toyo R888's they will fit your Sport wheels and give you the track tire with the grip you want...

DAN

V8Killer · 08-05-2011, 07:44 AM

Quote:

Originally Posted by One_Quick_Z

Yes most of those tires you listed will only fit 18" wheels or smaller.... maybe look into Toyo R888's they will fit your Sport wheels and give you the track tire with the grip you want...

DAN

Dan,

Thanks for your insight. So do you think these are pretty comparable to the above mentioned tires and a good buy?

One_Quick_Z · 08-05-2011, 11:23 AM

I am actually looking into these as my track tires since I will be running my sport rims for track days, I have heared good things about the grip.... But like anything I am sure you can find something bad about it..

DAN

V8Killer · 08-05-2011, 06:09 PM

Quote:

Originally Posted by One_Quick_Z

I am actually looking into these as my track tires since I will be running my sport rims for track days, I have heared good things about the grip.... But like anything I am sure you can find something bad about it..

DAN

What kind of track do you run? If you do decide to get these let me know what size you get and how the experience was. I won't be home till mid Sept. so by then I am sure I will know what I am getting.

phunk · 08-05-2011, 08:03 PM

Toyo R888 held high HP for me very well in my 350z, but not so much on the launches.

one thing you can do is have your alignment done to remove most of your neg camber in the rear, that helps with launch traction about as much as the tire you buy. especially if you have wide *** tires, all that extra width isnt even on the ground unless you get your camber flat.

also, a really good clutch helps too... because if you setup the car to hook up amazing, it doesnt have enough HP to pull thru the launch without bogging unless you do a hard slip on the clutch.... stock clutch will not last long like that.

V8Killer · 08-05-2011, 08:41 PM

Quote:

Originally Posted by phunk

Toyo R888 held high HP for me very well in my 350z, but not so much on the launches.

one thing you can do is have your alignment done to remove most of your neg camber in the rear, that helps with launch traction about as much as the tire you buy. especially if you have wide *** tires, all that extra width isnt even on the ground unless you get your camber flat.

also, a really good clutch helps too... because if you setup the car to hook up amazing, it doesnt have enough HP to pull thru the launch without bogging unless you do a hard slip on the clutch.... stock clutch will not last long like that.

Ya I don't know if I like the not much help on the launches for that is key in the 1/4. Now is that something I ask for when they are doing the alignment when I get my RE-11's? How will that affect my daily driving? The rear is going to be 285/35. The clutch should be good for I am having the JWT clutch flywheel combo installed and yes with the upgraded csc.

chuckd05 · 08-05-2011, 10:55 PM

mt et street 2's are insanely good for 1/4.... mine gripped so much i was never able to perfect the launch in my 3 passes with them... dumping clutch from 4k stilll had the car bogging, tons of grip!

V8Killer · 08-06-2011, 06:56 AM

Ya I have no idea what to do.

tranceformer · 08-06-2011, 09:03 AM

Quote:

Originally Posted by V8Killer

Ya I have no idea what to do.

I suggest you get out there and start practicing asap.

V8Killer · 08-06-2011, 09:25 AM

Quote:

Originally Posted by tranceformer

I suggest you get out there and start practicing asap.

Ya I would love to...but I'm overseas...

tranceformer · 08-06-2011, 10:01 AM

bummer

08-04-2011, 01:51 AM	#1 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	1/4 Tires! What to get? All right guys! I am new to this area so I wanted to know if someone could point me in the right direction. I typed in the search bar drag radials but nothing came up. Okay my car is N/A with blah blah blah mods. My car will have RE-11's in about two weeks. Now there is a local club in my area that is doing an event soon and they listed a few tires that are accepted to run in the event. DOT approved street tires example Nitto’s NT555R, Mickey Thompson ET streets, or Hoosiers QTP. Note: TIRES MUST BE DOT APPROVED. I would assume if I get some of the listed above I should go to a smaller rim than my Ray's correct? Experience, would help a lot in this as to I don't know much about what to get. I do want to run in the event as I am 1 out of 3 imports in the club as to a bunch of Camaro's and Trans Ams. So should I upgrade and if so to what? Or should I just stick with my RE-11s. __________________ "Punch" Too much to list and a baby shot of nitrous....

08-04-2011, 08:11 AM	#3 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	Yes most of those tires you listed will only fit 18" wheels or smaller.... maybe look into Toyo R888's they will fit your Sport wheels and give you the track tire with the grip you want... DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

08-05-2011, 11:23 AM	#5 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	I am actually looking into these as my track tires since I will be running my sport rims for track days, I have heared good things about the grip.... But like anything I am sure you can find something bad about it.. DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

08-05-2011, 08:03 PM	#7 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,654 Drives: 370 Rep Power: 944523	Toyo R888 held high HP for me very well in my 350z, but not so much on the launches. one thing you can do is have your alignment done to remove most of your neg camber in the rear, that helps with launch traction about as much as the tire you buy. especially if you have wide * tires, all that extra width isnt even on the ground unless you get your camber flat. also, a really good clutch helps too... because if you setup the car to hook up amazing, it doesnt have enough HP to pull thru the launch without bogging unless you do a hard slip on the clutch.... stock clutch will not last long like that. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph**

08-05-2011, 10:55 PM	#9 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 19	mt et street 2's are insanely good for 1/4.... mine gripped so much i was never able to perfect the launch in my 3 passes with them... dumping clutch from 4k stilll had the car bogging, tons of grip! __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-04-2011, 08:01 AM	#2 (permalink)
DarkZide Enthusiast Member Join Date: May 2010 Location: TN Posts: 291 Drives: 2010 370z BC M6 Rep Power: 14	ET Streets.

08-06-2011, 06:56 AM	#10 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Ya I have no idea what to do. __________________ "Punch" Too much to list and a baby shot of nitrous....

08-06-2011, 10:01 AM	#13 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 267	bummer __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mounting and Dismounting tires. Bad for tires?	Econ	Wheels & Tires	7	06-01-2011 07:21 PM
winter tires or rims and tires	2lo	Wheels & Tires	3	11-09-2010 05:12 PM
Looking for tires SIMILAR to GTR tires for my 370Z 19" Sport	Footloose301	Wheels & Tires	7	07-04-2010 01:37 PM
FS or WTT: 19" OEM Rays with Tires! 5k on the wheels & Tires. Perfect Cond.	tbonesteak	Parts for sale (Private Classifieds)	24	02-27-2010 02:50 AM
FS: Nitto Neo Gen Tires 245/35/19 (2 Tires)	Buddy Revell	Parts for sale (Private Classifieds)	0	12-21-2009 02:08 PM