It will not rub.

what kind of 20mm spacers should i buy to be sure tht the ride will be just as good ? part # or make ?

i run Kic's 15mm + hubcentric rings (rears only), but you can get ichiba's, H&R's, etc for a similar design. 15/20/25mm's.

check out the vendor section CPZ or CZP or something sells them at a good deal. :)

I like H&R.

H&R hands down for the perfect fit.

Can you run 20MM in the front if you're dropped on H&R springs or eibachs?

im pretty sure, yes. actually i think even stock height it can probably "look" okay... i left the front as-is because i am not a fan of tramlining and wanted straightline stability for our roads here.

Yup, I am running 20mm dropped on Eibachs in the front, looks dyna-mo!

20Front/25Rear or go home...

if i get spacers for the h&r drop on sport wheels, then most likely I will have to remove the spacers when I get aftermarket wheels? newb question.

yep, unless you get wheels that are similar to your factory wheel size and offset.

if you know you're getting aftermarket wheels i would just wait on the spacers unless you already have a set to use.

:tup: running same here.

25mm for the rear, wont that make the wheel come out of the fender or maybe rub?? or will that make wheel reallyflush with the fender ???

really flush with the fender.....only if you are dropped. before my drop i ran 25mm in the back and the tire was sticking out a little.

Won't this dial in more understeer?