Extended studs with Aftermarket wheels and lugs

ClemsonWill · 01-07-2011, 10:05 AM

I have TE37s in the standard 370z offsets and closed ended Rays Duralumin extended lugs nuts. I switch the stock sport wheels and TEs a good bit. I'm wondering if I get extended lugs and spacers for the stock wheels, will the extended studs be too long for my Rays lug nuts (without spacers)? Or are there any other complications I should worry about.

Thanks
Will

kenchan · 01-07-2011, 10:18 AM

Quote:

Originally Posted by ClemsonWill

I have TE37s in the standard 370z offsets and closed ended Rays Duralumin extended lugs nuts. I switch the stock sport wheels and TEs a good bit. I'm wondering if I get extended lugs and spacers for the stock wheels, will the extended studs be too long for my Rays lug nuts (without spacers)? Or are there any other complications I should worry about.

Thanks
Will

im not sure wat you mean?

are you planning to swap back and forth between the TE's and stocks?

if they are the same offsets why not just use the spacers for both apps?

ClemsonWill · 01-07-2011, 10:26 AM

yes, Swapping back and forth between stock and TEs.

They are not the same size. TE's are 19x9.5 +22 19x10.5 +12.

Stock 19s are 19x9 +47 19x10 +30 (I think)

I want to use a 15 and 20 mm spacer with the stock wheels.

kenchan · 01-07-2011, 10:36 AM

oh ok, i thought they were the same offsets.

anyway yah, i recommend you get deeper lugs for your TE's or open lugs in that case.

toxik · 01-07-2011, 10:43 AM

I had a similar issue and decided to keep spacers on just to make sure the lugs are properly tightened. But I am wondering if the stock lugs are deep enough.

01-07-2011, 10:05 AM	#1 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 446	Extended studs with Aftermarket wheels and lugs I have TE37s in the standard 370z offsets and closed ended Rays Duralumin extended lugs nuts. I switch the stock sport wheels and TEs a good bit. I'm wondering if I get extended lugs and spacers for the stock wheels, will the extended studs be too long for my Rays lug nuts (without spacers)? Or are there any other complications I should worry about. Thanks Will __________________ Slightly modded

01-07-2011, 10:26 AM	#3 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 446	yes, Swapping back and forth between stock and TEs. They are not the same size. TE's are 19x9.5 +22 19x10.5 +12. Stock 19s are 19x9 +47 19x10 +30 (I think) I want to use a 15 and 20 mm spacer with the stock wheels. __________________ Slightly modded

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: NEW set of KICS Project R40 NeoChro Lugs - 20pcs (16 lugs + 4 locks) 12x1.25mm	ATL_Red_G35	Parts for sale (Private Classifieds)	3	12-09-2010 09:18 PM
Factory wheel studs or aftermarket?	cossie1600	Track / Autocross / Drifting / Dragstrip	0	08-19-2010 12:29 AM
Nismo 370Z wheels, will Sport lugs work?	tjlazer	Wheels & Tires	1	02-02-2010 02:53 PM
Aftermarket Lugs on OEM Rays	spitfire9200	Wheels & Tires	8	02-01-2010 09:50 PM
Which Lock lugs for aftermarket rims	abakja1	Wheels & Tires	6	12-25-2009 10:22 PM

01-07-2011, 10:36 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	oh ok, i thought they were the same offsets. anyway yah, i recommend you get deeper lugs for your TE's or open lugs in that case.