370z sport rays wheels with 15mm kics project, will it fit?

ilostmypill · 08-29-2010, 08:02 PM

does anyone know if the sport rays wheels has the extra room for the original stud sticks out after install the 15mm kics spacers? look from outside, the wheel doesnt look like it has a extra hole. please help anyone?

azn370z · 08-29-2010, 08:16 PM

No it will not fit. You need 20mm for the front.

ilostmypill · 08-29-2010, 08:25 PM

so 20mm will fit right bro?

kenchan · 08-31-2010, 10:27 PM

Quote:

Originally Posted by ilostmypill

so 20mm will fit right bro?

The stock studs protrude into the back of the factory 19's by about 1.5mm on the front wheels. It's so insignificant you can grind the back of the wheel alittle bit on an angle to make clearance. Seriously doubt it would impact structural integrity.

I think this is why some folks were getting wobbly steering running V2 ichiba's
The wheels were not sitting flat on the spacers due to user error.

Azroadster · 08-31-2010, 11:03 PM

Why wouldn't you just get spacers where you replace your lugs with longer ones? I have H&R's that came with the correct length lugs for the spacers. Any decent shop could replace your lugs on all four wheels in about an hour. My local guy charged me $80 to do mine.

AZ Roadster

kenchan · 09-01-2010, 12:50 PM

Az- that's a good point.

The v2's are convenient for folks that have different spacers and want to change settings/wheels quickly. i have several different sizes and types. the traditional type that comes with new studs are good if you are certain where you want to be at, but clumsy when you need to go down a size or wat not and your lugs are too shallow or dont want to use open lugs, studs too short, etc. V2 you just swap them out very quickly with little tools.

08-29-2010, 08:02 PM	#1 (permalink)
ilostmypill Base Member Join Date: Aug 2010 Location: vancouver Posts: 162 Drives: 2010 40th Rep Power: 14	370z sport rays wheels with 15mm kics project, will it fit? does anyone know if the sport rays wheels has the extra room for the original stud sticks out after install the 15mm kics spacers? look from outside, the wheel doesnt look like it has a extra hole. please help anyone?

08-29-2010, 08:16 PM	#2 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	No it will not fit. You need 20mm for the front. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

08-31-2010, 11:03 PM	#5 (permalink)
Azroadster Base Member Join Date: Jun 2009 Location: Arizona Posts: 195 Drives: 2009 370Z Yellow 7sp Rep Power: 15	Why wouldn't you just get spacers where you replace your lugs with longer ones? I have H&R's that came with the correct length lugs for the spacers. Any decent shop could replace your lugs on all four wheels in about an hour. My local guy charged me $80 to do mine. AZ Roadster __________________ AZ Roadster '09 Base\|Chicane Yellow\|TSW Nurburgrings\|Stillen CBE\|Eclipse AVN726E In Dash DVD/NAV\|Clear Bra\|H&R Spacers 15/20\|Hankook Ventus V-12's 275/35 & 305/30

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19" Stock Rays wheels powdercoat project	Phimosis	Wheels & Tires	84	09-03-2015 08:55 AM
SpeedElement LUG NUTS! \| WORK \| RAYS \| DEEVO \| MUTEKI \| PROJECT KICS \|	SE	Tires/Wheels	174	12-31-2012 04:47 PM
Project Kics R40 Anyone?	1013mm	Parts for sale (Private Classifieds)	4	03-14-2010 10:30 AM
FS: 370z 19" Rays Sport Wheels with Nitto tires	ZachUA	Parts for sale (Private Classifieds)	19	01-04-2010 09:31 AM

08-29-2010, 08:25 PM	#3 (permalink)
ilostmypill Base Member Join Date: Aug 2010 Location: vancouver Posts: 162 Drives: 2010 40th Rep Power: 14	so 20mm will fit right bro?

09-01-2010, 12:50 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Az- that's a good point. The v2's are convenient for folks that have different spacers and want to change settings/wheels quickly. i have several different sizes and types. the traditional type that comes with new studs are good if you are certain where you want to be at, but clumsy when you need to go down a size or wat not and your lugs are too shallow or dont want to use open lugs, studs too short, etc. V2 you just swap them out very quickly with little tools.