Anyone running a 265 40 19 on a stock ride? I'm looking to run the Goodyear G2 265/40 and 325/30 on nismo wheels

Will these fit or any issue?
Front: 19x9.5"+12 255/35/19
Rear: 19x10.5"+12 305/30/19.

Thanks

The problem I see with your combination is the front isn't a run flat, and the rear is. That's the only way they come in those sizes from looking at the tirerack charts. Also the tires are asymmetric/directional.

The directional doesn't bother me, I've never cats for run flats I'm just worried about the fronts fitting to be honest. I'll probably run the g2 on the rear and the extra kumho xs I have up front

The fronts are doable, but might cause you some rubbing. Look up carlitos_370z. I know he was running that size offset wheel on the front and it worked pretty well for him. not sure what camber he was running though.

:iagree: Bro! like you said it work perfect on my Z and I use my car daily... i have camber for sure... but is nothing crazy... but to be honest i dont remember my alignment specs :wtf2:

Ok guys so I am a complete noob when it comes to wheels, I know the basics about sizes and offsets and what not but I am wondering if these will fit my Z. I have a 2014 base 370z.

Front: 18x8.5 5x114.3 offset 25 OR 35 (Don't know which is better)

Rear: 18x8.5 5x114.3 offset 35

or

18x10 5x114.3 offset 25

Forgot to add these will go on my OEM base tires!

I will chose 18x10 rear man... or if you want to run square setup i will look for 18x9 o more ;)

Sweet thanks man I will probably go with 18x10 on rear, would you recommend spacers as well since the offset on OEM is +45, if I remember correctly, and on these its 25?

OH JK. Offset is +15 on rear lol. 45 is on front. I should be good with this info.

no problem bro! well you dont need to run spacers on the rear with that offset ;)

What size/concave
 

Ok so I want 18 and I believe I want 11s in the back and 10s in front. I would like to do semi concave/f deep concave/r or deep concave/f and super deep/r

I would like to keep stock camber and probably going to stay stock height, I might possibly drop 1 in in the future but no more. What offset would I need and what would be the best tire size?

offset for front would be around +31(+ or - 1,2)
offset for rear would be +19(+ or - 1,2)
these will sit close to flush/ seller should know & would be great to test fit some.

What Brand Tire? & do you want stock diameter or close to it?

Haven't researched that far yet. My came with Michelin pilot ss and they seem to stick really well when they are new. Not so sticky now though. Any suggestions. It's my daily. Might see a track day once a year but not much until I make more money. I do some dig racing with some local guys.

Not Quite sure what Dig racing is (maybe drag racing?) but some people on the forum swear by the bridgestone re11's, it's just gonna be hard to find a daily driver tire in the 18"wheel diameter to fully fit those 11' wheels.
Also; if it is drag racing/ that wide of a front wheel & tire will slow you down.
Look over that PM i sent you & it will give you some additional ideas.
Mine is not a daily driver/but i know all about the finance issues...lol

What wheels & tires are on your Z now?

Dig drag same thing. I was thinking that might be too wide. Prob go 9f/10r to save on tire prices. Stock wheels and Mich pilot ss