Wheel locks for Nismo Wheels (2013)
I am purchasing a set of the Nismo wheels from Z1 and they have the lug nuts (shank style, also called Mag seat) but I am not finding any wheel locks that will complement the black lugs.
I honestly get confused with all the different styles of lug nuts so maybe I am jut all messed up. Any recommendations for black wheel locks that will work with the Nismo wheels? Thanks! |
Quote:
I have the black lugnuts from Z1. |
There is a thread about Z1 nuts. I don’t think they fit well. I’ll find it when I get home in the evening. Don’t take my word as the truth until I find that thread.
|
You have to use OEM wheel locks that only come in silver on OEM wheels. If you want them to match your black lugnuts, you'll have to customize them yourself.
|
@Cooltoy... I think this is the link you might be looking for... :tiphat:
And you're correct... the Z1 lugs don't fit properly when I ordered from them some months back. ( unless they corrected the issue ) Best bet is to get them from Zspeed... they match OEM perfectly. http://www.the370z.com/wheels-tires/...-lug-nuts.html |
I got the black ones for free one time (bought a part from someone and he threw those into the deal). When I put them on, I too realized there was a tiny bit of wiggle. Measured it, and all 16 were all a hair smaller. I thought I was just being paranoid, switched back to OEM. I guess i wasn’t alone.
|
Quote:
For the sake of everyone's [potential]safety, I really hope that Z1 corrected this but I don't have a lot of confidence they did. :icon14: |
Quote:
You are correct. Thank you. |
Thanks for the great info! I see the ZSpeed set is out of stock but I will keep an eye on it. Do the OEM wheel locks even deter anyone from stealing the wheels?
It is very strange Z1 recommends lug nuts that don't fit. |
This is concerning I just ordered a set of the black ones....guess I'm making another call.
|
Quote:
Quote:
|
So the Zspeed set is no longer available from their supplier. Any other good options for black lug nuts that actually fit :)
|
Great!. :icon14:
I haven't torqued down my Z1 Lugnuts yet. Prior to this thread, I did compare them to the OEM and found they were slightly shorter. I didn't think anything of it. Didn't measure wall thickness. I've got 20mm wheel spacers that I had to cut down the studs, so we'll see if my measurements that were based on the OEM nuts, will work with the slightly shorter z1 black lugnuts. zz |
|
Bump. I'm curious about the CZP lugnuts also.
|
All times are GMT -5. The time now is 06:04 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2