New Aodhan DS02 Wheels 19x9.5 +15/+22 & 19x11 +15/+22

denchan350gt · 08-17-2016, 06:48 PM

Quote:

Originally Posted by Anthony@Royal

19x9.5 +15 & 19x11 +15

245/35 & 275/35

Photos of all 3 finishes on the first page of the thread.

I saw that do you have a close up of the other 2 finishes like you did the gold.

Anthony@Royal · 08-18-2016, 12:30 PM

Quote:

Originally Posted by denchan350gt

I saw that do you have a close up of the other 2 finishes like you did the gold.

These are the only other ones I have

CedzZ34 · 08-21-2016, 12:30 PM

Quote:

Originally Posted by Anthony@Royal

Tire is a little stretched too. If you put a meaty tire and take out all the camber, it will sit more flush.

Hey Anthony

What size tires would you suggest for the rear? My 275s had way too much stretch and I couldn't mount them. I don't mind staying stock height and want them to sit flush with stock camber if possible.

Also, how are you handling the center cap on the rear? Mine pops off from the center but when I mount the wheel on the rear.

Thanks...

MicntaeG35 · 08-21-2016, 03:45 PM

how much for 2 19x9.5 and 2 19x11 in the black vacuum shipped to 35173

Anthony@Royal · 08-23-2016, 12:20 PM

Quote:

Originally Posted by CedzZ34

Hey Anthony

What size tires would you suggest for the rear? My 275s had way too much stretch and I couldn't mount them. I don't mind staying stock height and want them to sit flush with stock camber if possible.

Also, how are you handling the center cap on the rear? Mine pops off from the center but when I mount the wheel on the rear.

Thanks...

We run 275 on our car because of how low the car is. If you're not lowering the car, you can get away with a 295 or even 305.

In regards to the cap, we haven't run into this issue before. Is there anything on your hub that is interfering with center cap? What is causing it pop off?

CedzZ34 · 08-23-2016, 12:39 PM

Hey Anthony. Thanks so much for the response. I'm running your rims up front and the stockers in the back until I get this figured out. LOL...

I was hoping I'd be fine with the 295's or 305's, but just needed some confirmation. Still not sure why my 275's were stretched so much and was concerned that 285's would have the same issue...

About the center cap, check out my picture. It shows what's pushing off the center cap when I mount the rear rims. It's the axle nut that seems to be the problem... With that being said, would a 305 still be alright with a 5mm spacer?

Anthony@Royal · 08-26-2016, 01:41 PM

Here's the Chrome finish

cooltoy · 08-26-2016, 06:50 PM

If too big, right click - view image.

CedzZ34 · 08-28-2016, 04:41 PM

Looks good CoolToy. Are you running wheel spacers on the back? I'm still having issues with the axle nut pushing my center cap off...

cooltoy · 08-28-2016, 05:25 PM

Not mine.

CedzZ34 · 08-28-2016, 09:26 PM

Damn. This is confusing? Anthony, is my Z different, or are there a few different versions of these wheels? Not sure if I can swing wheel spacers to make the center cap work. Any suggestions?

cooltoy · 08-28-2016, 10:57 PM

They make 1 mm spacers, maybe that is all you need.

axmea? · 08-29-2016, 12:23 AM

Saw this one when it arrived. It is a great value. I would probably choose a satin or a matte finish but that is my personal preference.

CedzZ34 · 08-29-2016, 05:27 AM

Quote:

Originally Posted by cooltoy

They make 1 mm spacers, maybe that is all you need.

May have to give that a try. I've seen a few pictures on a 370z Facebook page that have The same issue as me. Not sure if its a difference in wheels or cars. In a strange way, I'm glad its not just me...

I've been trolling fleabay for different (domed) center caps with the same diameter as well. Just hard to find them in this color...

Thanks CoolToy...

Anthony@Royal · 08-30-2016, 12:59 PM

Quote:

Originally Posted by CedzZ34

Damn. This is confusing? Anthony, is my Z different, or are there a few different versions of these wheels? Not sure if I can swing wheel spacers to make the center cap work. Any suggestions?

No, there's only one version of the wheel. We've sold a bunch of these wheels and no one else has run into this problem. You can try a 1mm-3mm slip on spacer, maybe that's all the clearance you need.

08-21-2016, 03:45 PM	#49 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 10	how much for 2 19x9.5 and 2 19x11 in the black vacuum shipped to 35173 __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

08-26-2016, 06:50 PM	#53 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,937 Drives: 14 PW 370Z S/T MT Rep Power: 240204	If too big, right click - view image. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 08-26-2016 at 06:53 PM.

08-28-2016, 05:25 PM	#55 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,937 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Not mine. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-28-2016, 10:57 PM	#57 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,937 Drives: 14 PW 370Z S/T MT Rep Power: 240204	They make 1 mm spacers, maybe that is all you need. CedzZ34 likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-29-2016, 12:23 AM	#58 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53240	Saw this one when it arrived. It is a great value. I would probably choose a satin or a matte finish but that is my personal preference. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-26-2016, 01:41 PM	#52 (permalink)
Anthony@Royal Banned Join Date: May 2015 Location: Orange County, CA Posts: 559 Drives: 13 370Z PW M6 Rep Power: 0	Here's the Chrome finish

08-28-2016, 09:26 PM	#56 (permalink)
CedzZ34 Base Member Join Date: Apr 2016 Location: Alabama Posts: 44 Drives: 2011 370z Rep Power: 9	Damn. This is confusing? Anthony, is my Z different, or are there a few different versions of these wheels? Not sure if I can swing wheel spacers to make the center cap work. Any suggestions?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] BNIB Aodhan AH03 Meister/SP1 Reps 19x9.5 & 19x11 - $650 Will Ship Too	Anthony@Royal	Parts for sale (Private Classifieds)	10	08-09-2016 12:13 PM
Aodhan AH03 19x9.5 & 19x11 - 5 Spoke w/ Big Lips - Special Member Price	Anthony@Royal	Tires/Wheels	19	03-29-2016 05:32 PM
19x9.5 and 19x11 set up	Em370z	Wheels & Tires	6	04-21-2015 06:21 PM
[FOR SALE] Staggered 19x11 and 19x9.5 - Zedd SL5 Wheels and Tires	Bizasuge	Parts for sale (Private Classifieds)	14	03-10-2015 02:10 AM
New Avant Garde AG Mesh Wheels 19x9.5 et20, 19x11 et18 Satin Black	mattjk	Parts for sale (Private Classifieds)	14	12-20-2010 12:10 PM