H&R 20mm Lug Size?

ARrado15 · 04-10-2016, 10:57 PM

The previous owner had the 15mm H & R Spacers up front and 20mm in the rear which I assume has the stud replacement. Well dumb me took the spacers off to track down a odd noise when at speeds above 50, and had the rear studs go completely through the lugs, and now am in search of new ones. What size do I need for the rear 20mm spacers?

POS VETT · 04-11-2016, 05:31 AM

The hex size is usually 21 mm for most Nissan vehicles.
Thread is 12x1.25 mm.
The stock OEM 370Z wheels requires lug nuts with straight shank. Aftermarket wheels usually need lug nuts with a conical seat.
Length varies with application, but an open-ended lug nut would suffice.

What "size" were you asking?

ARrado15 · 04-11-2016, 01:13 PM

I was wondering how long the lug has to be. Just so I don't bottom out the lug again

04-10-2016, 10:57 PM	#1 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 16	H&R 20mm Lug Size? The previous owner had the 15mm H & R Spacers up front and 20mm in the rear which I assume has the stud replacement. Well dumb me took the spacers off to track down a odd noise when at speeds above 50, and had the rear studs go completely through the lugs, and now am in search of new ones. What size do I need for the rear 20mm spacers?

04-11-2016, 01:13 PM	#3 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 16	I was wondering how long the lug has to be. Just so I don't bottom out the lug again __________________ Stillen G3, Stillen CBE, Berk HFC, Eibach Springs, H&R Spacers, PW:JDM Knob, RJM Clutch Assembly, Z1 Clutch & Flywheel, Zspeed HD CSC, Stillen Oil Cooler

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jordan Retro 6 Infrared size 11, 11.5, & 12 \| Carmine size 10.5	Blessed89	Misc Items for sale (No Z stuff)	0	12-08-2014 11:18 PM
[FOR SALE] H&R 20mm DRM Spacers	neohalo	Parts for sale (Private Classifieds)	5	10-09-2014 09:06 PM
[WTB] 20mm spacers	zilverbullet	Parts for sale (Private Classifieds)	10	08-02-2013 02:33 PM
[FOR SALE] H&R 20mm spacers	370redline	Parts for sale (Private Classifieds)	9	06-13-2012 07:30 PM
[FOR SALE] Used 20mm H&R DRM Spacers	fxroar	Parts for sale (Private Classifieds)	7	09-24-2011 06:04 PM

04-11-2016, 05:31 AM	#2 (permalink)
POS VETT Track Member Join Date: Apr 2015 Location: Columbus OH Posts: 612 Drives: Z34\|C4LT4\|C6Z06\|V25 Rep Power: 3366	The hex size is usually 21 mm for most Nissan vehicles. Thread is 12x1.25 mm. The stock OEM 370Z wheels requires lug nuts with straight shank. Aftermarket wheels usually need lug nuts with a conical seat. Length varies with application, but an open-ended lug nut would suffice. What "size" were you asking?