NISMO rear wheels on the front
 

Any one tried this yet? I have a extra set of fender and fiberglass... 1.2 inch wider on the fender looks easy enough.

I'm pretty sure the hubs are made so that you can't do this. That's why Nismo's can't put bolt on spacers on the front.

:confused: huh?

There is a bolt or something sticking out of the front wheel hubs. The front wheels have a notch that allows the wheel to fit on the hub over the bolt. The rears do not have the notches. This prevents people from fitting the rear wheels on the front. If you have aftermarket wheels this is usually not a problem since the manufacturers account for this.

You can remove the nut and they'll fit, a guy in Birmingham runs 10.5 rears all around no problem

yah, that stud is just screwed on and as long as the spoke clears the calipers should fit fine. not sure how it induces tramlining though.

but the other comment about bolt-on spacers.. if the stock studs are not hitting the back of the wheel disc u can use bolt-on spacers. or u can even grind the stock ones shorter if ure really committed to that wheel.

It's been done a few times. Running the rears on the front, and using spacers on the rear to bring it out to match. All you have to do is remove the bolt on the front hub. You have to do it anyway with aftermarket rims too. Most do not account for the bolt.

How long have you been a member of this board?

hell, just drive in reverse to get rear wheels up front.:p

Ah, my bads. Didn't realize it was a simple bolt. Carry on.

http://uploads.tapatalk-cdn.com/2016...910e1fab2d.jpg

Doh

Done 305 RE-11 Pull the fenders and go up to 2.3 in the camber current pic is 1.5

http://www.the370z.com/members/pokey...sc00628low.jpg

http://www.the370z.com/members/pokey...sc00633low.jpg

http://www.the370z.com/members/pokey...sc00626low.jpg

Now with Camber change and extra fender pull

http://www.the370z.com/members/pokey...sc00638sml.jpg


http://www.the370z.com/members/pokey...sc00639sml.jpg

old front on left new on the right

http://www.the370z.com/members/pokey...3-dscf5003.jpg

How do you like them so far, trying to decide if I want to try this or go with the staggered nismo setup


Sent from my iPhone using Tapatalk

Still looking for a set of NISMO rears for a good price

Why don’t you just go 285/35/19 all around with the Nismo 10.5 up front?

I'm really interested in doing this as well.

NISMO rear wheels on the front
 

I want 305s all around :)


Sent from my iPhone using Tapatalk

That would look insane. lol

Would love to try this setup out... already running 4 OEM Rear sport Rays on 2 sets of track tires. That extra half inch of rim would fit a bit more tire, always welcomed...

with the rear nismo wheels on the front how much do they really stick out from the fender? do you really have to pull the fenders a lot? I know op hasn't said anything in a really long time. Just hoping that maybe someone will see this in new posts.

do you have any pictures of how that looks? Im really curious to see. It probably looks amazing

You don't need a pull at all

there's nothing magical about the nismo rears, they're a wheel like any other wheel.

The size is 19x10.5 +23.

Height, camber, and tire size will affect whether you need to touch the fenders at all.

If you're running a wide size like a 285, you probably should roll your fenders

Anyone have pictures of the 10.5 square Nismo Wheel setup?

Anyone? haha

Working on it! Waiting to get tires mounted

if you really need help still
http://www.the370z.com/wheels-tires/...ml#post3567010

third pic

I've seen more people running the 370 Nismo V1 wheels, but have you seen anyone running a square set of Nismo V2s?

It's the exact same size so it will fit the same

I know, but have you seen it done before? I would love to see how they look.

Here are the some square Rear Nismo V2's with 285/30's with a 15mm spacer in the rear.

F: 19x10.5+22
R: 19x10.5+7

https://i.imgur.com/QpoFXRi.jpg