Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Tuning (http://www.the370z.com/tuning/)
-   -   Florida tuners (http://www.the370z.com/tuning/98310-florida-tuners.html)

JWillis72 01-13-2015 01:46 PM

Harry @ Z Tuner has been great to me and my car, I drive there from Ft Myers because I trust him to do it right.

Marblez10 06-01-2016 05:56 PM

Are there any recent suggestions for a UpRev tuner shop in Florida?
I have done research and this is what I am getting

HP Logic - Mixed Reviews more bad than good
Fever Racing (Zfever) - mixed reviews
Billet Design Motorsports - pending an email response

I live in Miami so I have to make a drive no matter where I am going but want to know if there are any updated reviews or any of these or other tuner shops.

Thanks

Elmo370z 06-01-2016 06:16 PM

yes only if you're willing to drive to tampa

Elmo370z 06-01-2016 06:19 PM

Harry at Z tuners is great, but tunes little to conservative for me ( i was NA) boosted application and standalones i highly recommended him. Other choice is martin at RS-Enthalpy | Yes, we can tune that is gave me a retune i picked up all across the board and made 18whp, my sheet is on the intake section comparing the two tuners. Martin only uses z fevers dyno, he isn't assoicated with them. Choice is your's sir

Z1NONLY 06-01-2016 06:52 PM

Quote:

Originally Posted by Marblez10 (Post 3490964)
Are there any recent suggestions for a UpRev tuner shop in Florida?
I have done research and this is what I am getting

HP Logic - Mixed Reviews more bad than good
Fever Racing (Zfever) - mixed reviews
Billet Design Motorsports - pending an email response

I live in Miami so I have to make a drive no matter where I am going but want to know if there are any updated reviews or any of these or other tuner shops.

Thanks

Put me in the "good" category for HP logic. They did a great job on my STU 350Z.

Marblez10 06-01-2016 06:57 PM

I am NA not boosted

Z1NONLY 06-01-2016 07:02 PM

Quote:

Originally Posted by Marblez10 (Post 3490992)
I am NA not boosted

Me too.

My STU prep was: drop-in K&N, Berk HFC's, Borla TD exhaust.

+12HP peak, 20HP under the curve, 400RPM Rev-limiter bump. Pulled strong and smooth all the way to the bumped redline...and practically lived in the top-half of the tach with no issues.

Marblez10 06-01-2016 07:07 PM

Ok thanks for the help


All times are GMT -5. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2