Eibach sway bar install
 

I received a front Eibach sway bar today and I'm planning on installing it this weekend. My question is what setting should I put it in, soft or stiff? This is my DD but I will also be using for a couple of autocross events each month.


Sent from my iPhone using Tapatalk

Which setting is how much stiffer than stock?

Holes closer to the bars end tips are the softest setting...holes tighter to the center of the bar are the hard settings

go full stiff in front, and halfway(middle hole) in rear....thats what I did anyways:tup:

Since he only has the front,probably best to do mid setting...?

There are only two setting in the front. Eibach front bar is not as stiffer than Whiteline! I would go full stiff and then adjust back if you have to much under steer.

I Always go full stiff:tiphat:

:iagree: Full stiff front soft on the rear or stock bar if your not replacing that one. I used Whitelines with those setting and it give a great balance.:tup: