Nissan 370Z Forum - CJM Fuel Starvation Control Product, Round 2

Nissan 370Z Forum (http://www.the370z.com/)

- Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)

- - CJM Fuel Starvation Control Product, Round 2 (http://www.the370z.com/track-autocross-drifting-dragstrip/75375-cjm-fuel-starvation-control-product-round-2-a.html)

Thanks Phunk, received shipping Info a little bit ago. Excited that this miserable problem is going to soon be fixed! TY so much for making this thing.

I was wondering what your stock is like? Are you mass producing or is there limited availability?

Sent from my iPhone using Tapatalk

http://images.tapatalk-cdn.com/15/08...9648ee72a0.jpg
Ohhh yeah!

Sent from my SAMSUNG-SM-G900A using Tapatalk

sorry phunk. I've been on vacation I'm still in ill send payment asap

Quote:

Originally Posted by phunk (Post 3250670)

The only purpose for using the volt meter when checking the connector is because the pin locations dont match up intuitively on the outside connector. However, if you dont have a voltmeter, I can just send you a chart that demonstrates which inside pin leads to which outside pin. Or perhaps I can just add that to an installation guide update.

Otherwise the ohms part is just to make sure the sensor is getting full sweep and that also goes for the part with taping it to the ruler. If you are sure you bent the baffle completely out of the way, its not necessary to do any of that. I just have it in there to demonstrate a method to double checking before final installation. But access to that side of the tank isnt the difficult part anyway, so if you had to go back in that side its not the end of the world, you just have to wait until the tank is somewhat empty to go back in.

Phunk, did you get a chance to update the install guide with the pin chart? You can also post it here :)

FedEx says my kit should be arriving today. :happydance:

Now the question is do I try to tackle this on Saturday for my track day on Sunday.....:ugh2:

Don't... Only because you don't know what issues you'll run into while doing it and that could set you back thus rendering you out for track day. Unless you start on Thursday then you'd given your self a good buffer for the if in life haha

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by AnthonyD1978 (Post 3276769)

I havent yet, I will get to it shortly

If you try to tackle this on Saturday, you wont be at a track day on Sunday

Quote:

Originally Posted by AnthonyD1978 (Post 3276769)

Phunk, did you get a chance to update the install guide with the pin chart? You can also post it here :)

FedEx says my kit should be arriving today. :happydance:

Now the question is do I try to tackle this on Saturday for my track day on Sunday.....:ugh2:

Believe me. NO! Take your time and do it right. No short cuts.

Thanks guys. I will start some of the prep (running wires, removing panels, sizing the lines, etc) over the next few days and do the install next weekend lol.

Wise decision!

Envoyé de mon Nexus 5 en utilisant Tapatalk

This came in the other day :)

It's a shame that it's hidden away in the gas tank.

http://www.the370z.com/members/antho...8309-image.jpg

I just picked up a new voltmeter on the way to work so I can make a pinout for you.

I had THREE of them before, and cannot find any of them.. which is crazy because my shop is really clean.

Quote:

Originally Posted by phunk (Post 3279027)

I just picked up a new voltmeter on the way to work so I can make a pinout for you.

I had THREE of them before, and cannot find any of them.. which is crazy because my shop is really clean.

Voltmeter thieves are on the rise. :tup:

Package received. I repeat fish on. I repeat bird is in the nest. :P thanks Phunk got it today.

Hey who has the Linky Linky to install manual? Please link.

Quote:

Originally Posted by GSS138 (Post 3279538)

Package received. I repeat fish on. I repeat bird is in the nest. :P thanks Phunk got it today.

Hey who has the Linky Linky to install manual? Please link.

http://host.cj-motorsports.com/pdf/3...uel%20Pump.pdf