but the buyers already have the tracking numbers so they know its true!

dang man you're still up?

Its approaching bed time! Gotta get at least 4-5 hours sleep so I can get back here and crank some more.

im still here at the shop feeding the lathe..getting old fast.. time to get a bar feeder and fast

Well I guess that's where doing round-o's in a VMC isn't all that bad after all... Some custom jaws or other holding techniques and you can load up and cut several parts at once. Unless you really need the flawless concentricity on the part.

stuff a corner rounder just couldnt do, also very flat parts. is what it is lol

Sign-up / Deposit / Full Payment as of 6/17/14:

ChrisSlicks DEPOSIT PAID
clintfocus COMPLETE
martin82 COMPLETE
KF365 COMPLETE
FL 4Motion COMPLETE
mts COMPLETE
2011 Nismo#91 COMPLETE
nismo13807 COMPLETE
SS_Firehawk COMPLETE
Ron DEPOSIT PAID
Coyote COMPLETE
L.G. from Canada COMPLETE
SurfDog DEPOSIT PAID
S.S. from Australia COMPLETE
dragonbreath COMPLETE
cdoxp800 COMPLETE
A.P. from Canada COMPLETE
T.R. from Illinois COMPLETE
J.N. from UAE COMPLETE
K.L. from USA COMPLETE

Phunk, mine was successfully delivered. It's a shame this thing will be hidden away in the gas tank, but that's what it's for lol.

http://i298.photobucket.com/albums/m...07AB5EDCF6.jpg

Look what just fell off the turnip truck..........

Hey Charles,
Arrived yesterday, Thanks very much
Quick Question
How long do you think I should allow to do the install work, Is it a 2 hour job or a full day?
Cheers
Keith

I would give it 2 days, but it could probably be done in one session with some determination.

I think it took me about 5-6 hours. BUT, I didn't use the CJM wiring or relay, as I already had one installed in that area from when I had an aftermarket amp

When I did mine. I took 2 days being careful. Now I could do it in a day. It's best to take your seats out. Gives you MORE room. ;)

Need a little help
 

Guys, need a little help on this install. It's something I could probably do myself, but given my work schedule and other commitments over the next few months I just don't want to take it on.

I was going to have the GTR mech at my dealership do the work, but the dealership recently sold and I don't want to get involved in that mess right now.

So, a buddy of mine said he'd take it on for me in the near term with access to a lift. He used to build and repair helicopters in the military and he's helped me out on tougher car jobs in the past, I trust him completely, a lot more than frankly almost anyone in the car area. Anyway, the problem is he usually won't let me pay him fairly for his work and if I'm not there to be involved it's hard for me to judge time, etc. I HATE haggling with him to INCREASE the price when he does help me. I would like to get him $$ equivalent to what I would have paid Nissan, or at the very least an indy for the install.

For those that have paid a 3rd party for the install, would you mind sharing here, or via PM what you paid? That would go a long way to helping me be fair with him. Thanks in advance.

Mine should be fully installed by now! Thanks again Phunk!!