Nissan 370Z Forum
Page 60 of 74 « First 10505859 60 616270 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   The Official 370Z Autocross Thread (http://www.the370z.com/track-autocross-drifting-dragstrip/6383-official-370z-autocross-thread.html)

240se 02-13-2017 02:04 PM
Quote:
Originally Posted by beemerkid (Post 3614346)
I'm going to my first auto x ever next weekend, I'm pretty stoked. Getting lost on the course is my main concern haha.
I think everyone gets lost at first just try not to run over any course workers. It can seem like a sea of cones. Walking the course is a must but it will be different at speed. Ask someone with experience to ride along with you because that can help a lot.

gomer_110 02-21-2017 12:52 PM
Quote:
March Fastrack:
#20319 Same line 350Z and 370Z
The PAC feels that combining the 350Z and 370Z to one line in Appendix A does not cause a competitve imbalance in F Prepared. This allows using motor components from the 350Z to the 370Z motor and vice versa.

The proposed listing in Appendix A would be as follows:

FP
Nissan & Datsun
350Z (2003-2008)/370Z (2009-17)
Anyone want to build an FP 370z using a motor similar to what was used on the PWC and Conti series 370z's?

03threefiftyz 02-21-2017 02:17 PM
You could make more power in an FP 3.7 than the World Challenge cars ever made...

RanRich 02-22-2017 01:49 PM
Getting ready for KC region SCCA solo and am going to pull the trigger on some magnetic numbers. What size is everyone running and which would you all recommend between 8, 10 and 12 inch?

gomer_110 02-22-2017 01:59 PM
SCCA rules state 8" numbers and 4" letters.

Also our doors are aluminum so don't expect magnets to stick. Reuseable vinyl works well though.

I've always had good luck getting my numbers from SPS Performance.

wanabgts 02-22-2017 03:36 PM
FP 370z could be interesting. Have to figure out how wide the porsche is right now and see how the size goes. Power could definitely be in the 400+whp range, just matters if the car can be light/narrow enough.

Zack

xxAGAVExx 02-22-2017 06:33 PM
The Official 370Z Autocross Thread
 
My local club is doing an endurocross this weekend, each run is going to be 5-6 laps of the course. Should be a lot of fun, they do it once a year and this will be my first one.


Sent from my iPhone using Tapatalk

Brendan 02-22-2017 11:08 PM
Quote:
Originally Posted by xxAGAVExx (Post 3619250)
My local club is doing an endurocross this weekend, each run is going to be 5-6 laps of the course. Should be a lot of fun, they do it once a year and this will be my first one.


Sent from my iPhone using Tapatalk
take video

Brendan 02-22-2017 11:11 PM
Quote:
Originally Posted by gomer_110 (Post 3619162)
SCCA rules state 8" numbers and 4" letters.

Also our doors are aluminum so don't expect magnets to stick. Reuseable vinyl works well though.

I've always had good luck getting my numbers from SPS Performance.
Magnets are still good for the fenders and quarters. With that being said, I like the balance look of having number on the doors

https://c1.staticflickr.com/9/8415/2...caf8567e9d.jpgAutoX_9089 by lthnmsrtkn, on Flickr

xxAGAVExx 02-23-2017 05:56 AM
Quote:
Originally Posted by Brendan (Post 3619338)
take video


Will do :)


Sent from my iPhone using Tapatalk

03threefiftyz 02-23-2017 10:00 AM
Quote:
Originally Posted by wanabgts (Post 3619179)
FP 370z could be interesting. Have to figure out how wide the porsche is right now and see how the size goes. Power could definitely be in the 400+whp range, just matters if the car can be light/narrow enough.

Zack
Honestly, there were courses where Dave in his 914 was only marginally faster than my BSP car. Totally course dependent, but seeing as how I could make 100whp more and take about 250-300lbs out of the car it would have been a pretty even fight at worst. That said, when Tom O ran the 914 we were never in the same ballpark.

Z1NONLY 02-23-2017 01:38 PM
Quote:
Originally Posted by xxAGAVExx (Post 3619250)
My local club is doing an endurocross this weekend, each run is going to be 5-6 laps of the course. Should be a lot of fun, they do it once a year and this will be my first one.


Sent from my iPhone using Tapatalk
Tonda and I are signed up for the afternoon session (in the FRS). This will be the first endurocross for both of us too.

xxAGAVExx 02-23-2017 08:43 PM
Quote:
Originally Posted by Z1NONLY (Post 3619617)
Tonda and I are signed up for the afternoon session (in the FRS). This will be the first endurocross for both of us too.


Nice! I'll be in the morning session.


Sent from my iPhone using Tapatalk

xxAGAVExx 02-26-2017 09:36 AM
Here are my two endurocross videos. First run was pretty wet, second run it started to dry out and I was 19s faster.
https://youtu.be/hlq8yGeIDyc
https://youtu.be/_HbhLur6xoc


Sent from my iPhone using Tapatalk

Brendan 03-17-2017 11:15 PM
what kind of front camber are you guys seeing in b street trim?


All times are GMT -5. The time now is 04:17 PM.
Page 60 of 74 « First 10505859 60 616270 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2