![]() |
Quote:
|
To disable the yaw sensor, you can cut the green wire going to it (it's the Bosch sensor in the center console). Or you can wire up a switch - I used a factory seat heater switch to enable/disable mine.
Re: 285s in front - tires work best on proper width wheels, and ideal is usually when wheel width is about the same as tire width (1 inch of wheel width) = 25mm of tire width. That means a 285 tire works best on a ~11.5" wheel, much wider than the stock 9's. That doesn't mean 225's (~9" wide) tires are best on the stock front wheels, only that you're getting to a point of diminishing returns. The tire's construction also matters a lot too - something like a Hoosier A6/7 is designed to work well when "pinched" on a narrow wheel, but normal street tires aren't. |
fwiw I run 315/30-18 Hoosier A7's on a 18x10 wheel in the front. Turn in is great. Unfortunately, this doesn't help you street class guys much.
|
Quote:
|
No rub that I've seen. Wheels are 18x10 +30 front, 18x11 +18 rear with 315/30-18's all around. Currently at ~factory ride height with -3.0 camber up front although I know as little as -2.1 still doesn't rub.
|
Hmmm I may have to try out a 315/30r18 square setup once my nittos are done. I'm curious to see if it'll fit. I'm running -2.5 front camber, dropped maybe an inch on KW V3's. It'll be a bit of a pinch on 9.5" rims but it may work. God knows the car needs all the help it can get up front. lol
|
Bump.
Pretty cool weekend. We had two 370 in the top 3 in BS. There was also a pretty sweet looking, Boosted nismo running in ssm. AK370, it was nice meeting you. You drove well man. Congrats on the 1st place. |
Quote:
|
|
Quote:
|
|
Quote:
|
Brandan, that Z looks very familiar haha thanks for the pics! :tup:
PharmDZ, the car felt good just the tires have not much left in them anymore. There were 115 entries with 35 pro drivers. Ended up 34th overall raw time 2nd in my class. Next event is on the 12th which is Saturday, you should come up if you can. |
Quote:
|
awesome pics :)
|
| All times are GMT -5. The time now is 11:08 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2