Thank's for the reply, I did not yet buy the odb2 module that plugs in right behind the dash. My friend bought a lot of these so I got one decently priced. I will be orderign the odb2 soon though and it is plug and play.

I still rather connect the RPM via the wire instead of odb2 based on refresh rates.... I will update again in a few days when I have time to finish things up. The GPS on this isn't the greatest, takes a few minutes to acquire a signal and it's best to have it outside the car..... might stick it on the hatch somewhere (magnetic) or just open the window and put it on the roof while at the track...

In for updates

I haven't ordered the ob2 module yet, my friend is pricing it out!! Next on order is their universal 4 sensor USM module and add an oil pressure sensor. The Iq3 will output it and I can setup warning lights etc!

bump! did u ever find where to tap for rpm signal?

Ron, sorry this was on the back burner, I did not tap into the rpm signal wire, I just ordered an obd2 Wire for the racepak, got lucky and found one on ebay for $280 just now, I still need to tap into the rpm signal wire.

I also bought a steering column upper cover so I can relocate my iq3 dash in front of the stock dash.
Here's a quick chop I am removing it from the center cubby hole to here:

https://sphotos-a.xx.fbcdn.net/hphot...86644813_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...08808623_n.jpg

Also ordered one of these: Haltech IQ3 Dash Mounting Bracket Black Anodized Aluminum HT06 800 MB IQ3 | eBay
http://thmb.inkfrog.com/rsz.php?user...size=520&gap=0

this bracket is very expensive through racepak, I found that one very cheap... or you can make your own. I won't be able to do all this until 1-2 weeks, have a time attack this weekend so getting the car prepped.

Finally getting to relocating everything not finished yet:

https://scontent-b-lax.xx.fbcdn.net/...04&oe=54C14619

https://fbcdn-sphotos-g-a.akamaihd.n...a5a1b77d74927e

https://fbcdn-sphotos-a-a.akamaihd.n...6adcfb430e62c1

Lookin good man, ETA on Martin at the track?

I have to run this Thursday and car is far from done...... Fr Shootout by superstreet/import tuner.

Some updates, tachometer, shift lights and gear indicator have been programmed

http://tapatalk.imageshack.com/v2/14...dbbbbd324e.jpg

What does it use for those signals? CAN?

There is an obd2 cable you can buy extra, or you buy sensors but they are VERY expensive $300-450 each.... RPM signal you just tape into ECU rpm wire, pin 110.

Just having issues getting the obd2 to read right now will have to send it to manufacturer.