Nissan 370Z Forum
Page 2 of 9 1 2 34 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   New Best 1/4 !! 12.24 @ 111.81 (http://www.the370z.com/track-autocross-drifting-dragstrip/31919-new-best-1-4-12-24-111-81-a.html)

jnaut 02-21-2011 06:28 PM
Quote:
Originally Posted by ZboostADDICT (Post 951519)
if youd stop granny shifting and start double clutching like you should then you could go tens.
http://www.filmofilia.com/wp-content...rious4_5_m.jpg
HAHAHA

Quote:
Originally Posted by Jordo! (Post 951562)
Wow -- great times!

What are you putting down and what kind of dyno? Any weight redux?
319 @7940 rpm/ mustang dyno
seats/ nothing in trunk and battery move to rear, stock every thing else
Quote:
Originally Posted by RCZ (Post 951629)
wow.
wheres that wrx??? :)

Z eliminator 02-22-2011 07:32 AM
You are the man. If i was lived closer to you i would send you my 18 inch volks with the the 305 35 18 MT drag radials for you to use.
The tracks will not open up here for at last 2 months. Its - 21 up here today with the windchill factor.
Will call you some time this week.

serturbo 02-22-2011 10:32 AM
Congrats!!!

RockStarKick 02-22-2011 04:06 PM
Awesome time !!!

http://i636.photobucket.com/albums/u...149_bigger.gif

KaienZ34 02-22-2011 08:15 PM
Quote:
Originally Posted by RockStarKick (Post 952976)
:icon18::roflpuke2::icon18::roflpuke2:

Jordo! 02-22-2011 09:51 PM
Quote:
Originally Posted by jnaut (Post 951637)
319 @7940 rpm/ mustang dyno
Quote:
Originally Posted by Z eliminator (Post 952208)
You are the man. If i was lived closer to you i would send you my 18 inch volks with the the 305 35 18 MT drag radials for you to use.
Hey guys, what gear did you both dyno in?

Z elim is probably in 4th, right?

Z eliminator 02-23-2011 07:08 AM
I use 5th gear as its 1.1 on the 7 AT . I also have raised the speed limiter to 300km and the rev limiter to 8200. If you dyno in 5th with a stockset up you will hit the speed limiter at 255 km and it will cut out around 7250 to 7300 rpm.
My first dyno's were in 4th grear till i made the changes with my cobb.

Z

Jordo! 02-23-2011 10:50 AM
Quote:
Originally Posted by Z eliminator (Post 953898)
I use 5th gear as its 1.1 on the 7 AT . I also have raised the speed limiter to 300km and the rev limiter to 8200. If you dyno in 5th with a stockset up you will hit the speed limiter at 255 km and it will cut out around 7250 to 7300 rpm.
My first dyno's were in 4th grear till i made the changes with my cobb.

Z
Hmm. Okay, I can do the same now -- I might do a few pulls in 5th just to see if there's a difference.

Thanks! :tiphat:

3.SLOW6MT 02-23-2011 01:35 PM
Very nice run. Throw some DRs on there and you will be in the 11s!

Do you run with stock wheels?

red6spd 02-24-2011 09:28 AM
Quote:
Originally Posted by 3.SLOW6MT (Post 954534)
Very nice run. Throw some DRs on there and you will be in the 11s!

Do you run with stock wheels?


Untuned and never will be tuned HAHAHAHAHAHAAHAH

wolf370z 02-24-2011 11:19 AM
But...but..but... it's a naturally aspirated v6!

'Grats man, that is a wicked fast time for a 370z. I forsee the 11's in your future! :happydance:

jnaut 02-24-2011 07:17 PM
Quote:
Originally Posted by Jordo! (Post 953531)
Hey guys, what gear did you both dyno in?

Z elim is probably in 4th, right?
i was in 4th gear to keep the speeds down on the rollers. this was on a mustang dyno and it doesnt matter as to which gear you are in. 4 and 5th are the best as there is more time to see afr's.

3.SLOW6MT 02-25-2011 08:35 AM
Quote:
Originally Posted by red6spd (Post 955797)
Untuned and never will be tuned HAHAHAHAHAHAAHAH
There is a full standalone coming out fool. It's about $1200 :ughdance:

jnaut 02-26-2011 10:42 PM
Quote:
Originally Posted by 3.SLOW6MT (Post 957812)
There is a full standalone coming out fool. It's about $1200 :ughdance:
hummm.... this would be nice as long as there is vvl control.

jnaut 02-26-2011 10:48 PM
Quote:
Originally Posted by Z eliminator (Post 952208)
You are the man. If i was lived closer to you i would send you my 18 inch volks with the the 305 35 18 MT drag radials for you to use.
The tracks will not open up here for at last 2 months. Its - 21 up here today with the windchill factor.
Will call you some time this week.
thanks steve!! but my next mods it going to be a set a brake rotors, then possibly drag race wheel!!

oh and on a side note its 78 degrees here today...soooo beautiful!!


All times are GMT -5. The time now is 03:01 AM.
Page 2 of 9 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2