haha no down hill here...its florida i can see the other side of the state. "all-motor" thanks you ... :) :driving:

And we all know that when you've got the traction, a favorable DA, and a real wheel-man you're going to put down some times.

I'm secretly hoping J has a set of ET Streets and skinnies at the ready to make a run at 11s N/A. :D

DO IT J! I want to see your Z doing this:

http://image.automotive.com/f/images...ang+launch.jpg

:driving:

HAHA funny you mentioned this as tranceformer and i were talking that about throwing our spare's on the front just to try and post up 12.2xx. :eek:

steve, how is the mustang? how you put it down the track yet? there are a lot of the new 5.0's here... the are damn fast!!

good gawd, that is a great time and some really great driving. :tiphat: Hat's off to you good sir. Just goes to show that in the right hands w/some reasonably mods, this car is no slouch. :tup:

It's been great so far! Best has been a 12.87 @ 110 fighting for traction. I'd be down there in the low 12s with you but as it stands right now I'm spinning into 4th. :icon18:

Though I'm on the stock Pirelli 255s so I'm thinking I may go the RE-11 or NT01 route next spring, especially after seeing how these RE-11s worked out for you at the track.

Anyways, keep up the good work man. I know you have 11s in you with a really sticky tire! Let's just see how long the diff/axles hold up. Someone's got to put them to the test!!!!!!!!

Don't do the NT-01's on the street as the noise will kill you! Great hard wearing track tire but just howl brutally on the street. Get the RE-11's or the NT-05's.

Oops, I did mean NT-05, not NT-01. :facepalm: Thanks for the catch. :tup:

I second that. I'm digging the NA track runs.

I asked the officals at my track if i could run the sports spare tire on my car and they said no. 18 x 4 rim. There is a a radial tire that fits it. 170, 60 , 18.
Im looking for a sport package spare tire rim.
The guy at my track has a dodge srt wagon with a 6.1 L. with a SC on it and he run's 11.1's in the 1/4. He runs a 17 inch rim with a spacer. They have a thing about cars running spacers on them as well but todate they have let him run them.
z

You need to get some drag skinnies!

No body make 's drag skinney 18 inch tires.
I have a set for my 350 z . weld 15 x 4's with mickey thompson front skinneys,
They will not clear the sport calipers.

Time to sell the sport brakes.

hahaha .... ill pass on that. :icon17:

LOL everyone is scrambling to buy more parts to beat 12.3 ET.

Just imagine what you could do if you turned the car into a real drag strip machine. :excited:

More parts, a complete built 7 AT from GTM. the converter is done, the VB is almost done and the tranney is very close. All i need is the $$$$$$.
coming soon.
Z

when we get another cold snap ill do some passes with the skinny's on the front!! we will see...

jnaut...what motor oil do you run? and how much do you weigh? lo jk...what oil though?

8qts of mobil one. :P

jeebuus 8 qts...lol

Hey, that's what my Mustang and Benz take! :tup:

:driving: what kinda benz?

i got a huge oil cooler!!! yay ftw!! :tup:

jnaut what intake and exhaust do you have...i tried looking on your Pro but didnt find it:tup:

If you lived closer id send you my drag radials on the 18 inch rims.

Z

I used to have it all listed in my sig but changed that. All mods as follows: Stillen g3 and crank pulley, Fast intentions long tubes/cat back, uprev, aluminum flywheel(stock clutch) and rear gears.:tup:

Thanks Steve but that is a long walk!! U should come down here and bring them, there is drag racing all year long hehehe ;)

CLK500 :tup:

whoa nice time!

ill gladly trade my base brakes for some sports to any taker out there, lol...

also our diff isnt the best, i cut 1.89 on the open diff and no better than a 2.0 so far on my vlsd but my launching technique was wrong. I never practiced other than at the track... But I've since gotten much better at getting the Z going off the line..

The gears + flywheel are the difference in the launch though becuase theres a slight bog and soft spot with mine, with the 4.08s that sprob corrected as well as giong through the 1/4 at the top of 4th not the begining...

Jnaut is def the bench mark for n/a's and prob pissing off some FI'ed Zs out there!

I think i am going to upset some people on my350z.com hehehe

:icon18::tup:

Why would you...HR350z is still faster

I wonder what jnaut will run in a HR .. 11.9 ?

Love the avatar!!!!!

hummm.... i have heard this rumor from many....:icon18:

I heard they are faster even than RSX type Sssssssss

:icon18:

:tup: