Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   CJM Road Race Fuel Pump, Production Round 4 (http://www.the370z.com/track-autocross-drifting-dragstrip/109721-cjm-road-race-fuel-pump-production-round-4-a.html)

phunk 04-11-2016 02:40 PM

Quote:

Originally Posted by Spooler (Post 3445331)
I am going to have to back out for now Phunk. I will let you know in the future. My car got re-arranged in the rear due to an idiot driver.

Sorry to hear about your car.

Quote:

Originally Posted by Elmo370z (Post 3456608)
Payment sent

Payment confirmed!

derraj06 04-13-2016 10:24 PM

Final payment sent. Hoping I can get this in with enough time to install before Zdayz.

Thanks for all the hard work!

Elmo370z 04-14-2016 12:17 AM

Quote:

Originally Posted by derraj06 (Post 3458971)
Final payment sent. Hoping I can get this in with enough time to install before Zdayz.

Thanks for all the hard work!

Im right there with you. I'm trying to get mine installed along with my racing seats before z day

ban25 04-14-2016 04:15 AM

Hey Charles, I'm doing my pump install with Rob at Z-Car Garage as part of my build. Not sure how to handle my reservation here...have you guys been in touch?

phunk 04-14-2016 06:47 PM

Quote:

Originally Posted by derraj06 (Post 3458971)
Final payment sent. Hoping I can get this in with enough time to install before Zdayz.

Thanks for all the hard work!

Payment confirmed and applied!

Quote:

Originally Posted by Elmo370z (Post 3459008)
Im right there with you. I'm trying to get mine installed along with my racing seats before z day

I will reach out tomorrow and try and apply some pressure. I am very anxious to get these things shipping out the door! Open invoices make my OCD flare up.

phunk 04-14-2016 06:48 PM

Quote:

Originally Posted by ban25 (Post 3459049)
Hey Charles, I'm doing my pump install with Rob at Z-Car Garage as part of my build. Not sure how to handle my reservation here...have you guys been in touch?

Rob has mentioned to me that he wanted me to hold a unit for him. That reservation is active. Assuming its yours that he had me reserve, than it is in the works.

Elmo370z 04-15-2016 02:09 AM

Quote:

Originally Posted by phunk (Post 3459657)
Payment confirmed and applied!



I will reach out tomorrow and try and apply some pressure. I am very anxious to get these things shipping out the door! Open invoices make my OCD flare up.

No worries. Rather wait and have a pefect product. It will get to me when it's ready.

derraj06 04-15-2016 10:03 AM

Quote:

Originally Posted by phunk (Post 3459657)
Payment confirmed and applied!



I will reach out tomorrow and try and apply some pressure. I am very anxious to get these things shipping out the door! Open invoices make my OCD flare up.

It's all good my friend. There's only about 4-6 turns you can actually fuel starve on the dragon anyway. My car is still in shake down mode so I doubt I'll pull a run fast enough that it is a consistent issue. I'm excited to get this in the car along with the oil pan and ATI damper. Hopefully it's a good start to protecting the engine.

phunk 04-26-2016 01:25 PM

I stopped by the anodizer today to check in and drop off a handful of small unrelated parts.

Apparently he is extremely backed up, things looked pretty hectic. He is still hoping to finish our parts this week. Keeping fingers crossed.

derraj06 04-26-2016 04:43 PM

Quote:

Originally Posted by phunk (Post 3468625)
I stopped by the anodizer today to check in and drop off a handful of small unrelated parts.

Apparently he is extremely backed up, things looked pretty hectic. He is still hoping to finish our parts this week. Keeping fingers crossed.

Hopefully he can get them done. I appreciate the update! Zdayz is getting close so maybe I can squeeze this thing in before hand.

Elmo370z 04-27-2016 11:28 PM

I second that, I've been reading over the instructions

phunk 04-30-2016 11:53 AM

Woooo parts are ready for pickup! I wish I checked my email earlier, they close at 1030am Saturday. But I'll get there first thing Monday.

Elmo370z 05-03-2016 12:10 PM

Quote:

Originally Posted by phunk (Post 3471572)
Woooo parts are ready for pickup! I wish I checked my email earlier, they close at 1030am Saturday. But I'll get there first thing Monday.

When they ship out well you provide taking numbers for those who have anyway paid in full

phunk 05-03-2016 12:59 PM

Quote:

Originally Posted by Elmo370z (Post 3473344)
When they ship out well you provide taking numbers for those who have anyway paid in full

Absolutely. I received the parts back yesterday morning and got them inventoried. Hoping to get the first couple kits shipped out tomorrow!

Elmo370z 05-03-2016 01:03 PM

Sweet

BGTV8 05-05-2016 09:40 PM

PM Sent

phunk 05-06-2016 08:29 PM

2 Attachment(s)
Quote:

Originally Posted by phunk (Post 3473362)
Absolutely. I received the parts back yesterday morning and got them inventoried. Hoping to get the first couple kits shipped out tomorrow!

I wanted to make a post before the weekend since I know silence is disheartening.

Attached are photos from today. I finished assembly of the first 12 from this batch to be headed out. The only reason they didnt make my UPS shipping cut-off today is because the new pre-fabbed hoses are sort of time consuming to build (they involve a heat gun and special press and a bit of manual labor). These WILL be done tomorrow and they WILL be out the door Monday.

Why am I behind schedule from my post a couple days ago? Tuesday I had to leave at 3pm for a wake and then drive up north 2 hours to the race track for support. The next morning, I will spare you the story-time, but I had to take the first sick-days I have taken in several years. I will be working through the weekend to catch back up.

Elmo370z 05-07-2016 10:53 PM

Cheers, cant wait until the products arrive. I think we all understand how busy of a,person you are building a empire. Two thumbs up for all the hard sir

derraj06 05-10-2016 08:50 AM

Just wanted to say thanks for the call concerning my shipping address!

Here's great customer service. I moved from between the time I put a deposit on a system and the time the final payment was sent so there were two shipping addresses. Most places would just pick one at random and ship it. Charles however, took the time in his busy schedule to give me a shout and ask. Five minutes later it was sorted and my pump will be at the correct address soon.

Great shop that I look forward to continuing to do business with! I'll probably end up with a fuel system soon and I know that'll be as awesome as the oil pan and RRP.

street2soul 05-10-2016 09:03 AM

hey phunk, I'm on the finish payment section. seems like its charging shipping again?

derraj06 05-10-2016 09:22 AM

Quote:

Originally Posted by street2soul (Post 3477594)
hey phunk, I'm on the finish payment section. seems like its charging shipping again?

use coupon code rrpship and itll take it off.

Elmo370z 05-10-2016 11:53 AM

Its getting close to shipping, yes!!!

hjo1078 05-10-2016 05:15 PM

any boosted guys getting this rrp ?

Elmo370z 05-10-2016 08:55 PM

Phunk has it on his 671whp Z

phunk 05-10-2016 09:18 PM

Actually I dont use the RRP in my car

dP3NGU1N 05-11-2016 04:20 AM

Quote:

Originally Posted by phunk (Post 3477956)
Actually I dont use the RRP in my car

:eek2:

Elmo370z 05-11-2016 09:47 AM

Quote:

Originally Posted by phunk (Post 3477956)
Actually I dont use the RRP in my car

Shut my mouth lol

hjo1078 05-11-2016 10:35 AM

Well ill finally get to test mine out at zdayz. Phunk ill give u some feedback after.


Sent from my iPhone using Tapatalk

phunk 05-11-2016 01:13 PM

Quote:

Originally Posted by hjo1078 (Post 3478183)
Well ill finally get to test mine out at zdayz. Phunk ill give u some feedback after.


Sent from my iPhone using Tapatalk

everyone loves it! I am sure you will also.


Quote:

Originally Posted by dP3NGU1N (Post 3478017)
:eek2:

My Z doesnt see the road course.. and besides, we never have any left... every batch is 100% sold by the time they start shipping!

street2soul 05-11-2016 04:38 PM

paid in full!

Rusty 05-11-2016 04:41 PM

Quote:

Originally Posted by phunk (Post 3478294)
everyone loves it! I am sure you will also.




My Z doesnt see the road course.. and besides, we never have any left... every batch is 100% sold by the time they start shipping!

We got to get you on a road course. :driving: You'll be hooked. :icon17:

phunk 05-11-2016 05:27 PM

Quote:

Originally Posted by Rusty (Post 3478443)
We got to get you on a road course. :driving: You'll be hooked. :icon17:

LOL oh man, the things I would do if I didnt work 10-16 hours a day 7 days a week.

Hotrodz 05-11-2016 05:52 PM

Quote:

Originally Posted by phunk (Post 3478463)
LOL oh man, the things I would do if I didnt work 10-16 hours a day 7 days a week.

It's a bad deal when passion and hobby are your work. :p

Sent from my SM-N910P using Tapatalk

Rusty 05-11-2016 07:52 PM

Quote:

Originally Posted by Rusty (Post 3478443)
We got to get you on a road course. :driving: You'll be hooked. :icon17:

Quote:

Originally Posted by phunk (Post 3478463)
LOL oh man, the things I would do if I didnt work 10-16 hours a day 7 days a week.

You got to try it. Maybe that way, you will come up with more goodies for us track rats. :driving: :tup: A RRP for the turbo guys.

Hotrodz 05-11-2016 08:16 PM

I got finish paying mine off and then have it converted to a double pump system.

Sent from my SM-N910P using Tapatalk

Elmo370z 05-11-2016 08:33 PM

mine is paid off in 2 months

derraj06 05-12-2016 10:46 AM

Everything arrived safely! Going to be doing the install Saturday while some friends install some other last minute Zdayz prep items.

Elmo370z 05-12-2016 05:56 PM

Damn you lol, i was hoping to get my before z day

Felix 808 05-17-2016 09:52 AM

Bad news for me, :( Postponed

Good news for the next in line ;)


Thanks Charles, we'll catch it on the next go around :tiphat:

Elmo370z 05-17-2016 02:20 PM

1 Attachment(s)
Look what showed up at my front door today


All times are GMT -5. The time now is 11:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2