Just confirmed, Kerry will be bringing the 370Z auto with the GTM TT kit.

Quick thanks to Z1!! My spoiler looks great!! :tup:

http://img14.imageshack.us/img14/715...akspoiler2.jpg
Still under construction!!

yes it does!

Heck Yeah it does! Now for the pic of the entire car full body kit and all... When are they supposed to have it finished?

Geez I hate you guys!!!! lmao I want my car back soooo bad! When I show up dont be surprised if you hear WHITE DRAAAAGGGOOONNNN!!!!!! :tup: Wish I could make it to the dyno day! I will be in Michigan booooooo!

James, what time are you going? I might go with ya.

That better be on tight, Kevin! Cause if it ain't, I'm takin that thing!

Just kidding.... thing looks pretty badass :tup:



Yeah, what time?

What time will you be available? They close at 6pm.

I'm hoping to get there by no later than 3pm in case I need to get something done there.

I'm probably down for a morning run out there (10am ish?) before the day gets busy.

I'm hoping for sometime next week. I'm not putting any pressure on them though! ;)

My JDM Fog Light -- Thanks Z1
 

Just thought I'd shared some pics of my JDM fog light installed by Z1 today. Chris and I were over there today and the guys were great. John and Dustin, I appreciate the great care you showed to my 370. I will see you guys at Dyno Day on July 3rd.

http://www.the370z.com/members/z1804...ne2010-001.jpg

http://www.the370z.com/members/z1804...ne2010-002.jpg

http://www.the370z.com/members/z1804...ne2010-003.jpg

http://www.the370z.com/members/z1804...ne2010-004.jpg

http://www.the370z.com/members/z1804...ne2010-005.jpg

http://www.the370z.com/members/z1804...ne2010-006.jpg

http://www.the370z.com/members/z1804...ne2010-007.jpg

http://www.the370z.com/members/z1804...ne2010-008.jpg

http://www.the370z.com/members/z1804...ne2010-009.jpg

^looks good, james. How much that run you?

It was only about $85 plus installation. Just go out there and speak to Dustin or John. They'll take care of you.

Looks like they hooked it up to the parking lights with no switch. Is this correct?

James - Did you order it through Z1 or did you buy the light elsewhere? Looks nice!

They connected to my headlights like the JDM set up. I opted not to go with the switch.

I bought it through Z1. Thanks! I saw a few weeks ago while driving behind Kevin, it made the car look so different. Chris and I had a good time out there yesterday.

Nice to see the Atlanta area Z scene is still alive and well. Much more activity here than on the 350z side apparently.

congrats on the fog light
 

Looks good man... I got my rear fog light from Dustin at Z1 also. But did my own install and crimped it to my tail lights/head lights.

I have to second this, Z1 did a heck of a job installing that fog light. Mucho props!

James - The Z looks good at night. I knew that Fog was bright!

The factory Reverse Fog light is supposed to have a "Fog" Switch. Even with the switch ON, it will only activate the light when the head lights are switched ON.

To make the installation simple and painless, I suggest tapping into the Tag Light wires. The Fog Light does not pull that much power and will not trigger the blown blub light on the dash. Once you tap into these wires, you can simple drop the wires down the inside of the rear fascia and connect it to the fog light. Just make sure you secure the wires away from the exhaust. I will be supplying all reverse fog lights with an extended harness and 2 Scotch-Lock connectors for a quick install, however I HIGHLY recommend soldering the wires for a much more connection.

Sorry I can't make the Z1 meet, but I have vacation for their Z Nationals!!!!!!


I can go to the forged meet in the 17th, anyone else????

I'm sorry you won't be in attendance Mike. Hopefully, we'll see you at the next gathering.

I've been in communication with the guys at Z1 about the Dyno Day on July 3rd and we're trying to get an idea of how many people plan on coming so the food and drinks can be purchased.

Please let me know if you plan on attending or not so I can get them some numbers. We hope to see all of you there. If not, hopefully you can make it to the next gathering.

So far this is who will be in attendance:

Kevin -- kevr6
James -- Z1804
Jonathan -- Viera
Chris -- '10Anamoly
Jeff -- jtroun
Kerry -- TN GTM TT
Daisuke -- daisuke149

I can't make it on July 3rd :mad:

is it stupid to dyno a bone stock 370z with only K&N drop in?
Maybe I could find out how much hp gain I get from the drop in, my guessing is probably 2hp?:excited:

i will be 100% going to the dyno day on the 3rd so count me in!!!!!

ATL370Z,
It is actually highly recommend to dyno it now since your car is so close to being stock. Normal dyno fees range from $60 ~ $80 for three pulls. This is a golden opportunity to do some base line dyno pulls to document the starting point of you project Z. For $25, you cannot go wrong.

Dustin

Work Varianza T1S Wheels
 

I just ordered the Work Varianza T1S in a black polish finish in 20s.:stirthepot:

20x9.5
20x11

I got a great price on them. Let me know what you think!

http://www.the370z.com/members/z1804...anza-t1s-2.jpg

http://www.the370z.com/members/z1804...rianza-t1s.jpg

Thanks to Kev for taking the time to help me understand and decide the best offset to go with.

I have no idea how people are able to wait 8-12 weeks for their orders, but I have no choice. I'm told that it will go by in a heartbeat, but it sure does not feel like it.

Very nice!! You have good taste, sir!! These cars are meant for the dish effect!!

Following in your footsteps homie. You set the bar pretty high with those Venacis.

im gonna set the bar really low by keeping the stockers!! :-D

they look great James!

Thanks Mike! I have to wait 8 weeks to get them. It feels like forever:mad:

a dealership bent one of my iforged wheels on my 350z and I had to wait 3 and a half months for a replacement, so I know what its like!

Took me 5 to 6 months to get my wheels after being to told 8 to 10 weeks.

That's not very encouraging Kev...:shakes head: That would put me in 2011. Why did it take so long, outside of the fact that it was coming from Japan?

I just think I was the first person to order that wheel. Plus They were made to order with Inner TPMS valve stem. (Second hole drilled out)

Gotcha....I hope my deadline is more accurate because I know I'm not the first. Not even close........I told him to drill the holes for the TPMS too.

Sharp looking rims James!

On a side note: MAD PROPS to Z1 for helping me install my JDM fog light and wire it up. Looks so much better than the OEM blacked out panel. Booyah!

Guys looking for special and custom wheels, we offer HRE's with 3-4 week turnaround time in most cases. No super long waits.