Official South Carolina thread

ClemsonWill · 06-08-2011, 04:58 PM

Quote:

Originally Posted by sms8386

North Charleston WW's works for me. i work at bosch so its close. Do we have a day yet?

I'm thinking next Monday?

Quote:

Originally Posted by HKYStormFront

yea go with the Stillen's rooskey, they've been widely accepted as the best (though i doubt the injen is far behind) as far as power goes. that should help with your top end ponies breathing

Location of the filter is another great benefit to the Stillen. The other cold air intakes put the filter down in the lower corners of the bumper which isn't ideal imo.

Years ago I was going down white horse road in a rain storm. Didn't see a puddle. Puddle wasn't that deep but it stopped my car dead. AEM cold air intake either sucked up water or choked itself out in the water. I pushed it off the road and let it sit for about 30 minutes. I was able to drive away. Luckily I didn't kill the motor.

Rooskey · 06-09-2011, 12:20 AM

After tonight the intake is the least of my worries. Im bout ready dump this project on ebay. If I can not install bolt ons its not worth it to me. I should of installed a cat-back with a nitrous kit for the money I spent. Not really taken alot to the japs these days!!!!!

sms8386 · 06-09-2011, 08:52 AM

Monday sounds good. I'm in

ClemsonWill · 06-09-2011, 10:31 AM

Quote:

Originally Posted by Rooskey

After tonight the intake is the least of my worries. Im bout ready dump this project on ebay. If I can not install bolt ons its not worth it to me. I should of installed a cat-back with a nitrous kit for the money I spent. Not really taken alot to the japs these days!!!!!

What happened?

Quote:

Originally Posted by sms8386

Monday sounds good. I'm in

Awesome. So far there is 3 of us. I'm thinking 7pm. Does that work for you?

Rooskey · 06-09-2011, 11:06 AM

More CEL Codes. Now its P0057. I was running down the interstate last night at WOT for a long burst and all of a sudden I heard a loud pop through the engine. No I did not run over anything either. I dont know what the deal is with this thing

ClemsonWill · 06-09-2011, 11:30 AM

Sorry to hear that man. Ii'm pretty sure that's the upper O2 sensor. Take them out and check your solder connections.

I also saw where you had posted about oil consumption. How bad is it?

sms8386 · 06-09-2011, 01:21 PM

Quote:

Originally Posted by ClemsonWill

What happened?

Awesome. So far there is 3 of us. I'm thinking 7pm. Does that work for you?

7pm is good.

Rooskey · 06-09-2011, 03:51 PM

Quote:

Originally Posted by ClemsonWill

Sorry to hear that man. Ii'm pretty sure that's the upper O2 sensor. Take them out and check your solder connections.

I also saw where you had posted about oil consumption. How bad is it?

Yea im gonna drive the car to work tomorrow and check it out. Im using about one and quarter quarts per 3,000 miles

Matthew · 06-09-2011, 09:15 PM

Quote:

Originally Posted by Rooskey

More CEL Codes. Now its P0057. I was running down the interstate last night at WOT for a long burst and all of a sudden I heard a loud pop through the engine. No I did not run over anything either. I dont know what the deal is with this thing

That sucks man. Don't give up. You may just need a tune

ClemsonWill · 06-10-2011, 06:26 AM

Quote:

Originally Posted by Rooskey

Yea im gonna drive the car to work tomorrow and check it out. Im using about one and quarter quarts per 3,000 miles

That seems a bit extreme. I would take it in for a oil consumption test.

ClemsonWill · 06-10-2011, 06:28 AM

Quote:

Originally Posted by Matthew

That sucks man. Don't give up. You may just need a tune

Matthew.... When are you looking to get the TT and boobs installed?

Matthew · 06-10-2011, 08:57 PM

Quote:

Originally Posted by ClemsonWill

Matthew.... When are you looking to get the TT and boobs installed?

The boobs soon!! The TT may become the STS kit I have seen on here it sounds like a sweet deal. Also I think I could install my self so that would help in money. But I want to wait and se some reviews on it

IMWEZL · 06-11-2011, 09:14 AM

Quote:

Originally Posted by ClemsonWill

What's your schedule like during the week?

It's cool. We'll figure something else out.

It's hard to say. I just found out the class is cancelled but we have some other things popping up. I would love to go but as a Commander sometimes we get those last minute taskers and my personal philosophy is to not waste my Soldiers time if I can knock something out on my own.

Hey Rooskey I have a Stillen Gen 3 Ultra Long Tube Intake BNIB if your interested. I also have a BNIB Stillen Catback. I don't think I'm going to mod my Z for now.

Rooskey · 06-11-2011, 09:10 PM

How much do you want for the g3 intake setup?

Rooskey · 06-11-2011, 09:24 PM

Quote:

Originally Posted by Matthew

The boobs soon!! The TT may become the STS kit I have seen on here it sounds like a sweet deal. Also I think I could install my self so that would help in money. But I want to wait and se some reviews on it

How many STS kits are available and who makes them??

06-09-2011, 11:30 AM	#591 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 444	Sorry to hear that man. Ii'm pretty sure that's the upper O2 sensor. Take them out and check your solder connections. I also saw where you had posted about oil consumption. How bad is it? __________________ Slightly modded

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any upstate South Carolina members?	Rooskey	South East Region	1	09-16-2010 02:50 PM
Newbie here in South Carolina	ClemsonWill	New Forum Member	10	08-08-2010 08:02 PM
new 40th owner in South Carolina	Superthug	New 370Z Owner	13	06-16-2010 01:09 AM
I spotted a South Carolina 370z in Southern MD	zZSportZz	South East Region	0	06-29-2009 07:14 AM
I spotted a South Carolina 370z in Southern MD	zZSportZz	Southern Region	0	06-28-2009 07:12 PM

06-09-2011, 12:20 AM	#587 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 15	After tonight the intake is the least of my worries. Im bout ready dump this project on ebay. If I can not install bolt ons its not worth it to me. I should of installed a cat-back with a nitrous kit for the money I spent. Not really taken alot to the japs these days!!!!!

06-09-2011, 08:52 AM	#588 (permalink)
sms8386 Base Member Join Date: Mar 2011 Location: Charleston, SC Posts: 30 Drives: 2009 370z Rep Power: 14	Monday sounds good. I'm in

06-09-2011, 11:06 AM	#590 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 15	More CEL Codes. Now its P0057. I was running down the interstate last night at WOT for a long burst and all of a sudden I heard a loud pop through the engine. No I did not run over anything either. I dont know what the deal is with this thing

06-11-2011, 09:10 PM	#599 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 15	How much do you want for the g3 intake setup?