Stillen gen 3 short rams intakes

axwu1 · 08-14-2013, 08:50 PM

SOLD , Please delete.

axwu1 · 08-22-2013, 01:23 AM

bump.

Riptide67 · 08-22-2013, 02:01 PM

Had I known you ahd these, I may have bought them as well haha!

If you still have them in a bout a week, I may buy them from you.

Cmike2780 · 08-22-2013, 02:30 PM

Just for the sake of others, I think those are definitely the Gen 2's. There is only one Gen 3 intake and it's the ultra long tube cold air intake kit. It also seems like the filters are Spectre instead of the standard K&N Stillen uses. If these are the Gen 2's, it's also missing the boxes. The upper intake tube sections are the same for both the Gen 2 & 3 I believe. The only difference is that the Gen 3 locates the filters in the bumper and subsequently creates longer intake tubes.

OP, not trying to derail anything here. Just looking out for potential buyers thinking they're buying the Gen 3 version.

pfdaxe · 08-22-2013, 02:53 PM

Quote:

Originally Posted by Cmike2780

Just for the sake of others, I think those are definitely the Gen 2's. There is only one Gen 3 intake and it's the ultra long tube cold air intake kit. It also seems like the filters are Spectre instead of the standard K&N Stillen uses. If these are the Gen 2's, it's also missing the boxes. The upper intake tube sections are the same for both the Gen 2 & 3 I believe. The only difference is that the Gen 3 locates the filters in the bumper and subsequently creates longer intake tubes.

OP, not trying to derail anything here. Just looking out for potential buyers thinking they're buying the Gen 3 version.

I agree. They look like Gen 3's with filters replaced where the bottom tubes attach...
.
.

Z RATED OKC · 08-22-2013, 06:58 PM

Quote:

Originally Posted by pfdaxe

I agree. They look like Gen 3's with filters replaced where the bottom tubes attach...
.
.

Mike said they were G2's reread his post

They are not G3's I have them they a lot longer than the ones shown here

pfdaxe · 08-22-2013, 07:11 PM

I stand behind my statement. Sticker on them says Gen 3. They are just missing the long tubes..

axwu1 · 08-22-2013, 09:27 PM

Quote:

Originally Posted by Cmike2780

Just for the sake of others, I think those are definitely the Gen 2's. There is only one Gen 3 intake and it's the ultra long tube cold air intake kit. It also seems like the filters are Spectre instead of the standard K&N Stillen uses. If these are the Gen 2's, it's also missing the boxes. The upper intake tube sections are the same for both the Gen 2 & 3 I believe. The only difference is that the Gen 3 locates the filters in the bumper and subsequently creates longer intake tubes.

OP, not trying to derail anything here. Just looking out for potential buyers thinking they're buying the Gen 3 version.

Sorry, I dont want to say your wrong, but before the Gen 3 LONG TUBE came out they had the short rams. When the long tube came out they reduced the short rams and no longer called them the gen 3. To prove that, I will provide the original box and receipt when I bought it from fontana nissan of Fontana.

Thanks though.

DEpointfive0 · 08-22-2013, 09:44 PM

Quote:

Originally Posted by axwu1

Sorry, I dont want to say your wrong, but before the Gen 3 LONG TUBE came out they had the short rams. When the long tube came out they reduced the short rams and no longer called them the gen 3. To prove that, I will provide the original box and receipt when I bought it from fontana nissan of Fontana.

Thanks though.

I'd like pics of that

I don't mean to be the prick here... But...

You got shafted, it's not good to have the MAFs that close to the filters.
I'll put money on it that you only got the top section of the piping.

The Gen 2's didn't look like that either, and that was their short ram

Lastly, the Gen 3 Ultra Longs have been out since AT LEAST June 23, 2009 based on this review:

EDIT: Damn MotoIQ won''t let me link, lets try this, 5/23/2009:

Stillen claims 55whp with intake, hfc, and catback - MY350Z.COM Forums

You need to go back to Fontana bro

w0rM · 08-22-2013, 09:46 PM

Quote:

Originally Posted by DEpointfive0

I'd like pics of that

I don't mean to be the prick here... But...

You got shafted, it's not good to have the MAFs that close to the filters.
I'll put money on it that you only got the top section of the piping.

The Gen 2's didn't look like that either, and that was their short ram

Lastly, the Gen 3 Ultra Longs have been out since AT LEAST June 23, 2009 based on this review:
*****************************************/ID/881/Stillens-Gen-3-Nissan-370Z-Air-Intake-Tested.aspx

You need to go back to Fontana bro

Trips · 08-22-2013, 10:03 PM

To add some clarity here is a pic of the Stillen Gen 2

Like Andrew mentioned, It looks like you are missing the extended tubes to your actual Gen 3 setup.

All this is to just clear up the obvious confusion here.

Nonetheless GLWS

DEpointfive0 · 08-22-2013, 10:05 PM

Quote:

Originally Posted by Trips

To add some clarity here is a pic of the Stillen Gen 2

Like Andrew mentioned, It looks like you are missing the extended tubes to your actual Gen 3 setup.

All this is to just clear up the obvious confusion here.

Nonetheless GLWS

Yep, and the Gen 2's came with different filters as Trips mentioned. You DO have the Gen 3 filters

w0rM · 08-22-2013, 10:06 PM

Quote:

Originally Posted by Trips

To add some clarity here is a pic of the Stillen Gen 2

Like Andrew mentioned, It looks like you are missing the extended tubes to your actual Gen 3 setup.

All this is to just clear up the obvious confusion here.

Nonetheless GLWS

Notice the black trim on the filters rather than the silver on OP's post.

roy'sz · 08-22-2013, 11:20 PM

Quote:

Originally Posted by pfdaxe

I stand behind my statement. Sticker on them says Gen 3. They are just missing the long tubes..

Nce catch there on the pic...that sucks for the erson getting these.
Glws

Cmike2780 · 08-23-2013, 08:25 AM

Quote:

Originally Posted by pfdaxe

I stand behind my statement. Sticker on them says Gen 3. They are just missing the long tubes..

You're right. I didn't see the stickers. That would have been my second guess. Both the Gen 2 and Gen 3 came out a few years ago and this is the first time I've heard short rams referred to as the Gen 3 version. The red flag is the filters. Those are the shyty Spectre filters you see at AutoZone. Not saying the OP is lying or anything, but this just doesn't add up.

...then again, I could be wrong.

here's another article from 2009

08-14-2013, 08:50 PM	#1 (permalink)
axwu1 Enthusiast Member Join Date: Aug 2013 Location: Covina Posts: 350 Drives: '12 370z '13 Nismo Rep Power: 11	Delete SOLD , Please delete. Last edited by axwu1; 02-28-2014 at 01:26 AM. Reason: Delete

08-22-2013, 02:01 PM	#3 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Had I known you ahd these, I may have bought them as well haha! If you still have them in a bout a week, I may buy them from you. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-22-2013, 02:30 PM	#4 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 28	Just for the sake of others, I think those are definitely the Gen 2's. There is only one Gen 3 intake and it's the ultra long tube cold air intake kit. It also seems like the filters are Spectre instead of the standard K&N Stillen uses. If these are the Gen 2's, it's also missing the boxes. The upper intake tube sections are the same for both the Gen 2 & 3 I believe. The only difference is that the Gen 3 locates the filters in the bumper and subsequently creates longer intake tubes. OP, not trying to derail anything here. Just looking out for potential buyers thinking they're buying the Gen 3 version. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

08-22-2013, 07:11 PM	#7 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,060 Drives: 09 Touring AT Sport Rep Power: 15	I stand behind my statement. Sticker on them says Gen 3. They are just missing the long tubes.. __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

08-22-2013, 10:03 PM	#11 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	To add some clarity here is a pic of the Stillen Gen 2 Like Andrew mentioned, It looks like you are missing the extended tubes to your actual Gen 3 setup. All this is to just clear up the obvious confusion here. Nonetheless GLWS DEpointfive0 likes this. __________________

08-22-2013, 01:23 AM	#2 (permalink)
axwu1 Enthusiast Member Join Date: Aug 2013 Location: Covina Posts: 350 Drives: '12 370z '13 Nismo Rep Power: 11	bump.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] [WTB] Short Ram Intakes	polkayman	Parts for sale (Private Classifieds)	2	05-15-2012 12:12 AM
Takeda Short Ram intakes	toxik	North East Region	0	05-13-2011 11:28 PM
FS Custom Short Ram Intakes	ddvette9	Parts for sale (Private Classifieds)	2	11-29-2010 02:39 PM
Short ram intakes, what's the deal?	Sixth_Vang	Intake/Exhaust	13	09-17-2009 06:05 PM
Status Elite Intakes, Yes I own $800 short rams	Diversion	Intake/Exhaust	29	07-13-2009 02:16 PM